The method of installing AMD cpu 1 Install CPU.
1. Flat smart tie rod
Square motherboard, the processor has pins, flattening the motherboard is beneficial to the vertical installation of the processor. Find the processor slot of the motherboard. Generally speaking, the new motherboard processor slot will have a protection label. When installing a new motherboard, please remember to gently remove the protective substance before installing the processor.
2. alignment? Golden triangle?
There is a striking golden triangle on the mainstream AMD processor. When installing AMD processors, users can use this small golden triangle to align with the triangle on the edge of the motherboard processor card slot. This can ensure the one-to-one correspondence between the processor pin and the socket, and AMD's triangle mark still needs the user's careful operation.
3. Reset and tighten the pull rod.
The finishing work of the processor is similar to parking. When we stop the car, we must change the gear to neutral. After installing the processor, reset the motherboard lever to? p? File, simply put, is to return the lever to the original 0? Location.
Two. Installing radiator
AMD radiator is simple in design and adopts two-point buckle design, which simplifies the installation and disassembly much more than Intel.
Align the heat sink with the PCI port.
Fasten the buckles on both sides of the radiator on the buckles of the main board respectively, and pull up and down the pressure bar until it is completely pressed down.