If you can't open it, or there is no data after opening it, it only means that the motherboard does not support it. If it can be turned on normally, click the clock/voltage in the "Performance Control" menu on the left and click the mouse to open the operation interface;
The target speed in the upper left corner is the current frequency of CPU, which needs to be changed to break through the original frequency. There is a clock frequency box in the lower left corner.
There is an HT reference frequency in the box, which is the external frequency of CPU. Click on the slider and move slowly. Generally, the smaller the increase of 5, the better, because overclocking has a greater load on CPU.
After increasing the HT reference frequency value, check whether the target frequency is increased. This time it's not over. Click the application in the lower right corner, and the interface will be stuck for a while. If the overclocking frequency is too high, the computer will restart directly, so it is necessary to slowly increase the overclocking frequency, and gradually increase the frequency if the CPU can bear it.
Ok, click Apply, click OK, and it's done.
OverDrive is an official system detection overclocking tool launched by AMD, which is specially built for 3A platform, that is, it supports Snapdragon II processor, 7, 8 and 9 series chipsets and Radium HD 3000 series graphics cards. It can help you manually or automatically control the processor, chipset, memory, graphics card and other components, and make detailed adjustments according to your own needs.
If you are Xiao Bai, we can use the automatic overclocking function of automatic software. OverDrive can slowly detect an overclocking frequency that the platform can use in a stable state, and the software will also test the stability during the automatic overclocking process. Automatic overclocking street beat extension can be used for a long time.