Decorating walls with wooden boards is a popular way in recent years. Usually, wooden boards are used to decorate the wall, which has better environmental protection effect, clear appearance lines and good decoration effect. There are many kinds of wooden boards for wall decoration in the market, but the characteristics and use environment of different wooden boards are different. A thorough understanding of wooden boards is needed, so what kind of wooden boards should be used for walls? Next, let's take a look at Bian Xiao.

First, what kind of board should be used for the wall?

1, solid wood board

Solid wood board is durable and natural and transparent. In many boards, the decorative effect of solid boards is very good, but the disadvantages of solid boards are high cost and high requirements for construction technology.

2. Decorative board

Decorative board is a kind of decorative board with one-sided decorative effect, which can be accurately cut into veneers with a thickness of about 0.2 mm. Advanced decorative materials used in petroleum manufacturing.

3. Core plate

Particleboard is a kind of thin board with sawdust as the main raw material, then glue and additives are infiltrated. Particleboard is cheap, but its disadvantage is low resistance.

4, medium density fiberboard

Medium density fiberboard is made of wood fibers or other plant fibers, and it is a wood board made of urea-formaldehyde resin or other suitable adhesives. Medium density fiberboard is soft, impact-resistant and easy to reprocess.

5, fire board

Flame retardant board is a decorative board made by autoclaving technology. It is made of siliceous materials or calcareous materials as the main raw materials, with a certain proportion of fiber materials, lightweight aggregate, adhesive and chemical additives, and then autoclaved. But the structure and quality of fireproof board are higher than other boards.

6, melamine board

Melamine board is a common wall decoration material. Paper with different colors or textures is immersed in melamine resin glue, then dried to a certain degree and solidified, and then paved into particleboard, medium density or hard fiberboard. Decorative board formed by hot pressing on the surface of fiberboard.

Second, what kind of wooden board is good for the wall-what are the precautions for decorating the wall with wooden boards?

1, it is not recommended to put the wooden board on the adjacent wall of the bathroom or in the kitchen, bathroom and other places that are prone to moisture. If it is necessary to install wooden walls in these areas, appropriate expansion joints should be left in the installation process to adapt to the characteristics of floor expansion and contraction.

2. Keep the wall dry. Before the wall planking, if the budget is large or the remaining waterproof coating just exists, waterproof coating can be used in the planking area to prevent the board from getting wet. Of course, it is not a problem not to do this in the general area, but it is best to make the bottom waterproof in the dry area of the bathroom and the damp-prone area of the kitchen.

3. When the solid wood or composite board is laid on the wall, it needs to be removed. The keel can be played horizontally or vertically. The recommended spacing depends on the width of the board and can then be fixed with staples. (Big core board: It consists of two plywood and splicing boards. Total thickness shall not be less than 3mm).

4. Decorate the wall with boards. Trimming is very important when placing plates in a large area. At present, photo frames are usually used for cutting. At present, the longest photo frame on the market is only 3 meters long. For interfaces, interface processing requires higher flow methods. It is recommended to choose this brand of board, because its edge will be better and more beautiful.

The above is a small introduction about what kind of wooden board is suitable for wall surface. You can choose suitable wood materials according to your living environment and needs.