1. Fill the kettle with water first, and the water should not exceed the highest water level of the kettle as far as possible to avoid water boiling and overflowing.

2. Then put the boiling kettle full of water into the base and plug it in. Refer to the prompt temperature on both sides of the base display screen, click on the ON key and select the function key.

3. Then click the temperature button to adjust to the water temperature you need.

4. Finally, click the Boil button to boil the water. When the water temperature boils to 100℃, the water temperature will gradually drop to the set temperature.

Principle of thermostatic kettle

The principle of thermostatic kettle is to feel the water temperature through the internal temperature sensor, control the on-off current of the bottom heating plate, and heat the water to the set temperature. When the temperature is lower than the set value, reheating will be accompanied by sound.

Conditions that should be paid attention to when purchasing thermostatic kettle

There are three kinds of thermostatic kettles: ordinary electric kettles (without temperature control device), automatic temperature control electric kettles and automatic electric kettles with air pressure water supply device (the power supply can be automatically cut off or the temperature can be automatically maintained after the water is boiled). Thermostatic kettle is an electric appliance that works with water. Pay special attention to its electrical performance when purchasing to ensure no leakage. The connection between the power cord connector and the kettle body should be reliable, elastic and flexible.