1, iron, stainless steel and enamel pots are required for induction cookers. If the materials are not suitable, a code alarm will appear.
2. When selecting the pot body, the diameter of the pot bottom should be between 12-26cm. Put the pan in the middle of the electric disk when using it. Improper size will lead to alarm.
3. It is forbidden to take the porcelain plate out of the pot during use, so as to avoid long-term dry burning of the empty pot.
Protection code E2 If the temperature of the induction cooker is high or the heat dissipation of the machine is abnormal, E2 will appear. Check whether the ambient temperature is high and whether the air inlet and air outlet are blocked (avoid putting plastic paper or newspaper at the bottom of the machine) and avoid using it on metal countertops;
Protection code E3, the influence of high voltage, can try again at another time.
The protection code E4 is influenced by low voltage. Maybe there are too many machines used in the line, so you can turn off a few.
Protection code E5. In this case, please try to plug in the power again after the power is turned off.
Protection code E6 In this case, please try to insert it again after the power is turned off.
Protection code E7 If the coil temperature inside the machine is too high, E7 will prompt you to check whether the ambient temperature is too high and whether the air inlet and air outlet are blocked (avoid putting plastic paper or newspaper at the bottom of the machine), so as to avoid using it on the metal table. If it cannot be ruled out after operation, you need to contact after-sales treatment.
Protection code E8 product key protection, when the machine key is pressed for more than one minute, this will happen. You can check whether the keyboard is splashed by water or oil during use, wipe the machine clean, power it on again, select a function and try again. If it can't be ruled out, you need to contact after-sales treatment.
The problem of protecting code E9 cannot be ruled out by itself.