1. Implementation plan for resumption of production and work
This plan is formulated to guide enterprises to scientifically and orderly carry out the prevention and control of COVID-19 epidemic, improve the prevention and control ability of enterprises, effectively prevent the occurrence and spread of epidemic in enterprises, ensure the health and life safety of employees, and maintain the normal production order of enterprises. First, establish a mechanism.
(1) Implementing corporate responsibility. The establishment of COVID-19 epidemic prevention and control organization and management system, the person in charge of the enterprise is the first responsible person, and a special class is set up to be responsible for the epidemic prevention and control work of the enterprise.
(2) Formulating prevention and control plans. Including leadership system, division of responsibilities, investigation system, daily control, logistics support, information reporting, emergency response, etc. , to refine the implementation of the workshop, team, a clear person in charge.
(3) Improve the information reporting and liaison system. It is necessary to establish an information notification mechanism with the streets (townships) and health departments in the jurisdiction, and designate a person to be responsible. Establish an epidemic information reporting system, and clarify the process and responsible person.
Second, strict investigation.
(a) classification to return to work. An enterprise shall check and register the health status of its employees and confirm their health before returning to their posts. Those who are still in key epidemic areas will not return to their posts for the time being; Centralized isolation or home medical observation 14 days for employees who have lived in other areas with serious epidemic situation and had close contact with confirmed or suspected cases; For employees who have returned from other cities in the province and have no epidemiological history and related symptoms, if they really need to return to work due to production, they can return to work by "working in the factory and not leaving the factory, dormitory or designated area within 14 days".
(2) establish a ledger. Implement "one person, one file" management on the health status of employees who return to work, and fully grasp the action track (the location is specific to the house number, and the time is specific to a certain day and time), whether the physical condition is good, whether they have had close contact with fever patients, whether they have been exposed to wild animals, and the means of transportation and itinerary for returning. It is necessary to sign a letter of commitment with the returning employees and conduct health monitoring every day.
(3) Set up temporary isolation points. Relying on the infirmary or the basic medical and health institutions in the jurisdiction to do a good job in medical security, and set up temporary isolation rooms in the enterprise infirmary, dormitory and other areas as required. Enterprises that do not have the conditions to set up isolation places shall determine specific isolation observation places according to the unified arrangements of counties (districts) and parks, and report to parks and streets (townships) as required.
Third, do a good job of protection
(1) Protection preparation.
Statistics, procurement, storage required masks, disinfectants, gloves and other epidemic prevention materials. , and regularly check the inventory to ensure that every operator entering the site can wear a mask as required, and arrange a special person to be responsible for the disposal of abandoned protective equipment.
(2) ventilation and disinfection.
1, daily disinfection. Before returning to work, all places of the enterprise shall be disinfected once, and then disinfected regularly. Arrange special personnel to disinfect key areas every morning and evening. Commuter cars should be disinfected and replaced immediately after use.
2. Daily ventilation. In the workplace, open the window at least twice a day for ventilation for 30 minutes. Turn off the central air conditioner, and if necessary, disinfect and filter the inlet air according to relevant regulations; For the central air conditioning system with return air, a low-resistance medium-effect air filter should be set at the return air outlet, and the cleaning and replacement of the air filter at the new air outlet should be strengthened.
(3) Personal protection.
1, personal protection. All employees and temperature testers should always wear masks during work and keep a safe distance from their posts. Corporate property, cleaning, etc. Wear masks, gloves and other protective equipment as required.
2. Hand hygiene. Enterprises should set up hand washing facilities and disinfection supplies in their work and living places.
3. Accommodation arrangements. The number of people living in one room in the dormitory should be reduced as far as possible and distributed in four directions as far as possible. It is suggested that the bed be separated by curtains to avoid resting on the top of the head. Collective toilets should be equipped with hand washing and disinfection equipment, and personal daily necessities should be strictly separated.
(4) personnel control.
1, reduce aggregation. Encourage the use of information technology to carry out office work and reduce the frequency and time of meetings. If you really need a meeting, choose a relatively spacious and ventilated space, and participants should wear masks.
2. Optimize recruitment methods. Advocate online recruitment of employees, do a good job in health pre-examination, strictly check the flow of candidates within 14 days and register them properly, and go through the entry formalities under the condition of ensuring safety.
3. Commuting arrangements. Encourage employees to drive, ride or walk to work, and minimize the use of public transport. In principle, foreign employees are not allowed to leave the factory, dormitory or designated area within 14 days.
(5) Catering management.
1, the canteen is safe and hygienic. According to food safety standards, live poultry, live fish and meat that have not been slaughtered and quarantined shall not be purchased.
2. Standardize operational services. Before going to work every day, the canteen service personnel shall be given health examination and temperature measurement, and records shall be made. Canteen service personnel should wear gloves, masks, protective shoes, etc. In their work.
3. Arrange meals reasonably. Try to eat alone, and implement a separate meal system and a box lunch system. You can eat according to time, keep the distance between diners above 1.5 meters, reduce conversation, deliver meals to various units and other ways to reduce crowd gathering. The canteen should strengthen daily disinfection and ventilation.
Fourth, carry out monitoring.
(a) the implementation of previous temperature monitoring and registration system. Enterprises should carry out body temperature check twice a day to know the health status of employees in a timely manner through multiple channels. Set up temperature detection points in the factory, the gate of the park and the dormitory area, strengthen the management of the doorman, implement 24-hour personnel on duty, strictly check the people and vehicles entering and leaving, and make information registration. Once the symptoms of fever/respiratory infection are found, ask him to suspend his post and seek medical treatment in time.
(2) Implement employee health monitoring and reporting system. Do a good job in the daily absence registration of employees and know the reasons for absence in time. Enterprises with commuter cars should assign special personnel to take temperature measurements before employees get on the bus. If any abnormality is found, it should be handled in time according to the emergency treatment flow.
Verb (abbreviation for verb) deals with epidemic situation.
Enterprises should formulate emergency plans and deal with emergencies in a timely manner.
(1) epidemic handling procedures. Those who find suspicious symptoms such as fever, cough, chest tightness and shortness of breath. , should report to the health department and the competent department as soon as possible, and take measures such as isolation.
(2) Management of close contacts. In accordance with the principle of territorial management, actively cooperate with relevant departments, take temporary isolation management measures for close contacts, and do a good job of ideological appeasement.
(3) terminal disinfection. After the outbreak, under the guidance of local disease control institutions, according to the novel coronavirus Prevention and Control Plan (Fourth Edition) in the Technical Plan for Disinfection in Specific Places (Second Edition), do a good job in terminal disinfection of epidemic spots such as case production and life.
(4) Stop production or business. According to the scope and development trend of the epidemic, it is decided by the government of the jurisdiction. Take measures to temporarily stop production and operation when necessary.
Sixth, carry out publicity.
(1) widely publicized. Collect epidemic prevention knowledge, promotional videos and promotional videos, and publicize them through publicity boards, corporate WeChat and electronic big screens.
(2) technical training. Strengthen the training of operating skills of temperature detection, disinfection and other related staff.
(3) Health education. Popularize the knowledge of prevention in COVID-19, let every employee know the knowledge of prevention in COVID-19, and educate and guide employees to pay attention to personal hygiene. Wear a mask every day and keep a distance of more than 1 meter when communicating with people. Once you feel unwell, inform the management personnel in time, seek medical treatment in time, and actively cooperate with the isolation treatment and investigation of relevant departments.
2. Implementation plan for resumption of production and work
In order to strengthen the safety production management on the construction site, ensure the smooth development of post-holiday production work and eliminate all kinds of potential safety hazards, the inspection plan for returning to work is specially formulated, and according to the inspection plan for returning to work, the production work is comprehensively inspected before returning to work. First, check the content.
1.
2. Strengthen the inspection of key links and key parts.
3 actively carry out safety education and training activities.
4. Conduct a comprehensive and in-depth inspection of the production site: check the implementation of electricity, water, gas, safety protection, equipment status, labor insurance supplies, etc.
Second, the work objectives
The inspection requirements are comprehensive, in-depth and meticulous. It is necessary to improve the safeguard measures for production safety, thoroughly investigate and control potential safety hazards in strict accordance with technical regulations and standards for production safety, solve problems existing in safety management, and effectively prevent and resolutely curb accidents.
Third, the job requirements
1. Raise awareness and organize carefully.
It is necessary to fully understand that the inspection of returning to work is the basic premise and powerful guarantee for safe production. To combine their own production characteristics and safety production conditions, carefully organize the formulation of specific implementation plans, clear work objectives, and do the work thoroughly.
2. Strengthen leadership and implement responsibilities.
It is necessary to improve the understanding of post-construction safety production, always adhere to the policy of "safety first, prevention first and comprehensive treatment", resolutely overcome blind optimism and lax thinking, and earnestly strengthen post-construction safety production work. Management personnel of all departments should be in place in time to make all preparations before resuming production: ensure that someone is responsible for safety work, safety measures are in place, and safety inspection is comprehensive and meticulous. The safety production team leader of the company should give full play to the enthusiasm and initiative, improve the rules and regulations, formulate measures, and put the safety production responsibility in place.
3. The safety production team is responsible for this inspection.
It is necessary to do the post-holiday inspection without leaving dead ends, and the rectification without leaving future troubles; Intensify work, check records, file hidden dangers, take measures to rectify and resolutely curb the occurrence of construction safety accidents.
4. Strengthen safety training and education before returning to work.
(1), earnestly implement the three-level safety education, organize on-site production personnel to focus on safety knowledge education and training before returning to work, emphasize safety precautions after returning to work, and strive to improve the self-protection awareness of production employees, especially for new employees after the holiday, they must receive pre-job operation safety training, and those who have not received training and failed the three-level safety education are not allowed to work at their posts.
(2) Strictly implement the system of holding certificates for operators of special types of work, and those who have no special operation certificate or whose operation certificate has expired shall not work at their posts, thus effectively reducing potential safety hazards from the source and ensuring the smooth development of post-holiday safety production.
Four. Work development
The safety production team of the company shall inspect the production site. During the inspection, the relevant departments were required to rectify within a time limit by issuing the Notice of Rectification of Hidden Dangers, and all hidden dangers were rectified and rechecked.
Electricity consumption: the management and safety officer of the power department will inspect the dormitory, site and distribution area one by one, and correct the disorderly connection that does not meet the requirements of regular electricity consumption in time. Power switch and control box should check whether the lock is effective.
Mechanical aspect: check whether there is any abnormality in the safety protection of processing and auxiliary equipment, and whether there is any abnormality such as electric leakage.
Site safety protection: whether there are potential safety hazards on the ground and wall.
Fire fighting: check all fire fighting equipment, replace expired fire fighting equipment, and check fire hydrants, hoses, fire racks and fire boxes one by one.
Five, through the efforts of all parties, complete the preparatory work.
1, safety and civilized construction has been rectified.
2. All on-site mechanical equipment has been maintained and overhauled.
3. Personnel: educate new employees about safety in production.
3. Implementation plan for resumption of production and work
First, make careful arrangements and strengthen the implementation of responsibilities. After the Spring Festival, all kinds of production, operation and construction units have resumed production and work, and they are also at the peak of returning to Spring Festival travel rush. With the concentration of people, vehicles and logistics, the unfavorable factors affecting safety production have increased. At present, the situation of safe production is grim. In accordance with the requirements of "Party and government share responsibility, one post and two responsibilities, joint management, dereliction of duty and accountability" and "three musts", we will strengthen organizational leadership and strictly implement territorial management responsibility, departmental safety supervision responsibility and corporate responsibility. According to the characteristics of enterprises in the industry, enterprises should formulate feasible plans for resuming production and work, further refine and improve preventive measures, and earnestly implement the work of post-holiday safety production.
The second is to highlight key points and strengthen work measures.
It is necessary to closely combine the three-year special rectification campaign of safety and health that our county is carrying out, carry out in-depth special rectification of key industries, especially focusing on key industries such as fire fighting in crowded places, oil and gas pipelines, gas, ammonia-related refrigeration, and limited space operations, comprehensively and thoroughly investigate and control safety hazards and problems, and carry out rectification in accordance with the requirements of the "Five Implementations" to completely eliminate safety hazards. It is necessary to urge enterprises to organize relevant forces to conduct a comprehensive inspection and overhaul of production equipment and facilities to ensure that their equipment maintenance and testing are in place to meet the requirements of safe operation; It is necessary to promote the preparation of emergency treatment measures for enterprises, formulate and improve emergency treatment plans, especially improve emergency treatment measures for key dangerous posts and key devices, and implement them to posts and each operator; In order to ensure the safety production management in place during the resumption of production, enterprises must strictly implement the start-up plan and post operation procedures, and implement various safety precautions during the resumption of production.
Third, strictly control and strengthen the acceptance criteria.
Go deep into the enterprise in time, understand and master the work trends of the enterprise's resumption of production and work, and take effective measures in time when finding potential safety hazards. It is necessary to strictly follow the requirements of the plan for resumption of production and work, conscientiously perform the acceptance procedures, adhere to the acceptance criteria for resumption of production and work, and earnestly achieve maturity. One is admitted, one is qualified and one is reinstated. If the acceptance is unqualified, it is necessary to issue rectification instructions within a time limit and strengthen supervision and inspection. Acceptance work should adhere to the principle of "who accepts, who signs, who is responsible", and shall not arbitrarily lower the standard or resort to deceit. As the first person responsible for enterprise safety in production, the main person in charge of the enterprise should seriously organize post-holiday resumption of production, self-examination and self-correction, formulate maintenance work plan according to the actual situation, make safety technical disclosure to relevant maintenance personnel, conscientiously implement various safety precautions, strictly fulfill the acceptance procedures for resumption of production, and strictly prohibit blind resumption of production and return to work.
Fourth, strengthen supervision and law enforcement during the resumption of work and production.
We must adhere to the red line awareness and bottom line thinking, and the safety standards must not be lowered. It is necessary to strictly investigate, strictly control and strike hard, strengthen unannounced visits and surprise inspections, and resolutely deal with those who fail to implement the requirements for resuming work and production, resume work and production without acceptance, and fail to deal with major hidden dangers in time. The punishment is strict, the stop is decisive, and the customs are firmly closed. It is absolutely unambiguous and never soft. At the same time, it is necessary to strengthen supervision. Anyone who violates the procedures, lowers the standards, is lax in control and practices fraud in the acceptance work will be severely punished once found. If an accident is caused, the responsibility of relevant departments and personnel shall be investigated.
Five, do a good job in safety training and education during the resumption of production, and strengthen safety awareness.
Before resuming production and returning to work, all enterprises should be urged to conduct safety education for all employees to ensure that the qualified rate of training reaches 100%. In particular, it is necessary to do a good job in the "three-level" safety education and training for new and transferred employees, and strictly implement the assessment system. For on-site operators, it is necessary to organize post operation procedures and safety production rules and regulations for retraining and re-education; For special operations personnel, they must be certified to work, the person and the certificate should be integrated, the operation should be strictly in accordance with the relevant requirements of special operations, and the dangerous operation ticket should be strictly managed. The training and assessment of employees should be documented, and those who fail the training and those who have not participated in the training should make up lessons in time to ensure that those who fail the training or assessment are not allowed to take up their posts.
4. Implementation plan for resumption of production and work
In accordance with the requirements of the provincial and municipal epidemic prevention and control mechanism and the unified deployment of the district headquarters, the banking industry will resume work steadily and orderly, improve the quality and efficiency of financial services, fully guarantee enterprises to resume production, and promote stable and healthy economic development. I. Working mechanism
(1) Implementing the main responsibilities of financial institutions.
The bank is mainly responsible for the epidemic prevention supervision after the business premises resume work, and the main person in charge of the bank is the first person in charge of epidemic prevention and control in this institution. The bank should set up an epidemic prevention and control working group led by the main person in charge, formulate a complete epidemic prevention and control plan for returning to work, and report it to the Finance Bureau of High-tech Zone for adoption.
(2) Establish and improve the coordination and linkage mechanism for epidemic prevention and control.
Banks must obey territorial management, consciously integrate into the epidemic prevention and control grid, establish smooth communication channels and collaborative working mechanisms, and ensure that once problems arise, they can take effective measures in time and properly handle them in the first place.
Second, the return to work to achieve the standard
The first is to improve the prevention and control mechanism. Sign the resumption of work for epidemic prevention and control, formulate the work plan and emergency plan for epidemic prevention and control, clarify the organization, strengthen prevention and control measures, implement the main responsibility, and strictly follow the relevant regulations in emergencies.
The second is the conditions for returning to work.
1, 14 After returning to work, there is no history of close contact or sub-close contact, and there is no published history of staying in middle and high risk areas. The last six consecutive nucleic acid tests were negative.
2. Returnees should be residents in the prevention area. Enterprises should be closed in principle and gradually liberalized according to the situation. Under special circumstances, enterprises take the mode of "two points and one line" and "point-to-point" to pick up and drop off returnees. Residents in closed control areas, control areas and key areas are not allowed to return to their posts.
Third, the protective materials are complete. To prepare masks, gloves, thermometers and other prevention and control materials in advance, hand sanitizer, disinfectant, alcohol and other disinfection supplies to ensure adequate reserves. An emergency isolation room should be set up, and an inventory and use ledger should be established for materials.
Fourth, disinfection and sterilization should be in place. Do a good job in disinfection and sterilization of business premises and office areas, especially toilets, trash cans and public equipment that are in contact with more; Air conditioning fresh air operation, air conditioning humidification function closed, air conditioning air inlet and outlet disinfection, ventilation, ventilation, establish and improve the disinfection accounting.
Fifth, when the bank applies to resume work, except for the necessary posts, the staff of other posts will temporarily stay at home.
Third, the control measures after returning to work
First, strictly carry out temperature measurement and code verification. Set up a special person at the entrance of the business premises to check the temperature and coding, the number of nucleic acid tests and the wearing of masks for all personnel entering and leaving the business premises.
The second is to control the personnel density of business outlets. Take current limiting measures to reduce the detention time of customers at outlets, keep the distance of one meter, and there are no more than five customers handling business at the same time in business outlets to prevent the risk of aggregation and do a good job in registration.
The third is to strengthen the management of those who return to work. After returning to work, according to the requirements of the epidemic prevention and control headquarters, guide the personnel who return to work to do personal protection, keep a certain distance in service communication and avoid direct contact. Those who return to work will be tested for nucleic acid 1 time every week, and their body temperature will be measured every morning, noon and evening, and a health information ledger for those who return to work will be established and improved.
The fourth is to carry out extensive publicity and education. Post QR codes and epidemic prevention and control papers in conspicuous places such as business premises, and publicize epidemic prevention requirements and precautions by using walls and display screens. Arrange special personnel to carry out training on disinfection operation procedures and epidemic prevention and control measures to improve the ability of epidemic prevention and control and emergency response.
The fifth is to do daily disinfection and sterilization. Keep daily ventilation and cleanliness. Disinfect and record the business premises and office areas, air inlets and outlets of air conditioners, and public equipment that are in frequent contact every day.
Sixth, strictly implement closed-loop management. Those who return to work should be managed as close as possible. If it is really necessary to return to the place of residence or go out for business, the "two points and one line" closed-loop shuttle service will be implemented to reduce the flow of personnel; Suspend unnecessary meetings, assemblies, etc. , convenient for employees to eat in batches and meet off-peak dining requirements.
Fourth, the procedures for returning to work
1, the banking industry shall report to the Finance Bureau for filing when it resumes work. The bank submitted the epidemic prevention and control work plan, epidemic prevention and control book, list of returnees and nucleic acid detection of financial institutions to the District Finance and Finance Bureau.
2. Time schedule for returning to work. At 6: 00 a.m. on March 28th, the bank resumed production and gradually resumed normal production order. According to the unified arrangement of the headquarters, closed control areas, control areas, key areas and other areas shall be released after reaching the prescribed standards.
5. Implementation plan for resumption of production and work
At present, the prevention and control of epidemic situation in xx city has achieved phased results, and the demotion and unsealing are being promoted in an orderly manner to restore the order of production and life in an orderly manner. Under the premise of epidemic prevention and control, this plan is formulated to promote the orderly resumption of work and production of industrial enterprises (non-imported cold chain enterprises). First, clarify the responsibilities of various subjects.
(1) All enterprises are mainly responsible for the resumption of production and epidemic prevention and control, and must ensure that the resumption of production will not lead to the spread of the epidemic. The legal representative of the enterprise is the first responsible person for the prevention and control of epidemic situation in the enterprise.
(II) Each region is responsible for the supervision of the resumption of production and epidemic prevention and control of enterprises in this region, and the township street government where the enterprise is located is responsible for the territorial management of enterprises within its jurisdiction, and must ensure that all enterprises within its jurisdiction are included in the scope of supervision.
(3) All regions should immediately organize relevant industry authorities to set up special classes for enterprises to resume work and production, and be responsible for implementing the specific work of organizing and guiding enterprises to resume work and epidemic prevention and control.
(four) the headquarters at all levels have the right to inspect the enterprise's resumption of work and epidemic prevention and control work, and the enterprise must cooperate with the inspection work.
(five) the headquarters at all levels have the right to require enterprises that do not have the ability to prevent and control the epidemic situation or the epidemic prevention and control work is not in place to suspend their work and order them to stop working.
Second, the necessary conditions for enterprises to return to work
(1) A work plan for the resumption of production of enterprises and the prevention and control of epidemic situation has been formulated, and it has been reported to the township street governments under their jurisdiction and the competent departments for the resumption of production in various regions for the record. At the same time, the epidemic prevention and control book has been submitted (the template is formulated by the competent departments of production in various regions).
(two) have been confirmed to know and carry out the orders of the headquarters at all levels.
(three) the prevention and control management system and the specific responsible person have been determined.
(4) Reserved a certain amount of protective materials to meet the needs of production and operation for a period of time.
(five) has established guidance contact with the territorial medical and health forces.
(6) Isolation places have been set up, and all preparations for transshipment arrangements have been made.
Third, enterprises should make all preparations before returning to work.
(1) Organize every employee to fill in the Registration Form for Employees' Resumption of Work truthfully, grasp the information of employees' individuals, families, relatives and friends, epidemic situation, etc., take necessary measures immediately according to regulations, and report to the local headquarters.
(two) do a good job in all kinds of workplaces and dormitories, canteens, garbage spots and other places before returning to work, and implement prevention and control measures such as setting temperature measuring points.
(three) to educate workers about epidemic prevention, and to convey the work plan and work system of the enterprise to resume production and epidemic prevention and control.
(four) to strengthen training and emergency drills, to ensure that employees are familiar with the division of responsibilities, environmental sanitation, personal protection, abnormal situation handling, evacuation and other work requirements, so that emergencies can be handled in an orderly manner.
(5) The special classes for returning to work and production in various regions shall supervise and inspect the measures for preventing and controlling the epidemic situation of enterprises, and the competent departments of industry and information technology in various regions shall, jointly with relevant departments, review, confirm and reply the enterprises applying for returning to work and production.
(6) Before the enterprise returns to work, the employee's nucleic acid detection records should be verified to ensure that the employee has participated in the local full-time nucleic acid detection. At the same time, organize employees to conduct nucleic acid testing again within 24 hours before returning to work.
(seven) the enterprise shall verify the vaccination of all employees in COVID-19, and the employees who meet the vaccination conditions shall be vaccinated with various vaccines.
Fourth, enterprises should strengthen their own management after returning to work.
(a) adopt a closed management mode, minimize or avoid direct contact with foreign personnel, and resolutely prevent the import of the epidemic. Foreigners who really need to enter the enterprise should register their entry and exit time, name, contact information and other information, implement temperature measurement and "card code" inspection measures, and can enter only if they meet the requirements.
(2) Establish employee health monitoring system. Every day, employees have to take a temperature test before entering the office or factory. If any abnormality is found, it should be handled immediately and reported.
(3) Adjust and optimize the working methods, narrow the scope of personnel activities, and avoid the gathering of personnel due to various meetings and receptions. And cancel unnecessary gathering activities such as entertainment activities.
(four) to strengthen the bathroom, dormitory, canteen, bathroom, bathroom elevator and other key places of cleaning and disinfection, designated persons responsible for regular disinfection, elevator buttons, door handles and other frequent contact parts should be appropriately increased disinfection times.
(five) to strengthen the management of canteens, in addition to the procurement, production and other links to ensure the prevention and control of the epidemic, as far as possible to take meals, eating at the wrong time and other ways.
(six) to strengthen the management of dormitories, dormitories that do not meet the sanitary conditions and have no daily prevention and control measures shall not be opened.
(seven) the workplace should strengthen ventilation and maintain indoor air circulation. Natural ventilation should be adopted when conditions permit. When natural ventilation cannot be used or ventilation conditions are poor, physical ventilation should be carried out through mechanical equipment such as exhaust fan, ventilator and air conditioner. And directly discharged to the outside. When the central air conditioner is used for ventilation, the air conditioner should be cleaned regularly and the filter screen of the air conditioner return air outlet should be disinfected.
(eight) after the enterprise returns to work, it is necessary to organize employees to conduct regular nucleic acid testing in accordance with relevant regulations.
Verb (abbreviation of verb) and other related requirements
(a) the competent departments of various industries and disease control departments should strengthen the training and guidance on the prevention and control of epidemic situation before the enterprise resumes work and during the production and operation. Educate and guide employees to pay attention to personal hygiene and keep a distance of more than 1 meter when interacting with others; Wash your hands with running water and hand sanitizer immediately after contact with respiratory secretions.
(two) all regions should provide all enterprises with information on the procurement channels of protective equipment, and assist enterprises to purchase and reserve protective equipment.
(3) Enterprises should guide employees to enhance their ability to identify the authenticity of information through publicity and education, and do not forward, spread or speculate on false information, so as to create a good public opinion environment for epidemic prevention and control.
(four) all relevant departments and regions should pay close attention to the production and operation of enterprises, and take various practical measures to solve various problems encountered in the production and operation of enterprises.
(five) in the process of returning to production, enterprises should strictly manage production safety.