1, the sterilization and cleaning of the refrigerator should first unplug the power socket and take out all the contents of the refrigerator; Remove the partition of the refrigerator and wipe it with detergent and soft cloth.
2. Toothpaste is clean. If the sealing strip on the refrigerator door is moldy, it can be cleaned with toothpaste. Apply toothpaste to the moldy part of the sealing strip, gently wipe it with a towel or soft cloth every few minutes, and then rinse it with clear water.
3, vinegar cleaning, use vinegar to clean the moldy sealing strip of the refrigerator, and also clean the inside of the refrigerator, which can not only remove stains and mildew spots, but also disinfect and deodorize.
4, diluted bleach cleaning, cleaning the sealing strip with diluted bleach, not only can remove the moldy position, including the yellowing place can also be cleaned.
5. Mix and dilute warm water and vinegar according to the ratio of 1 3, dip it with a soft cloth and wipe the inside of the refrigerator; Dry the inside of the refrigerator with a dry cloth and install the partition.
6. Wipe the inner wall of the refrigerator with glycerin to form a thin protective film, which is easy to wipe off even if it is stained with milk or food residue. Sometimes vinegar instead of boric acid can prevent rust. Wiping the refrigerator with boric acid can easily remove the frost.
7. Be sure to clean the dust on the condenser and compressor at the back or bottom of the refrigerator. You can use a vacuum cleaner or brush to remove dust. Be careful not to wipe the dust on the refrigerator and compressor with a wet cloth.
8. When the refrigerator is out of service for a long time, you should first cut off the power supply, take out all the food in the refrigerator, clean the inside and outside of the refrigerator, and open the door for several days in a row to make the refrigerator fully dry and dispel the peculiar smell in the refrigerator. Check the drain pipe. If the drain pipe is blocked, water will leak into the refrigerator. Poke the drain pipe with a wire to remove the things accumulated on the drain pipe.