The water tray in the refrigerator is not aligned with the water funnel, causing water to flow in the refrigerator.
Elimination method: adjust the water receiving funnel and aim at the position of the water receiving tray.
The drain pipe freezes, so the defrosting water can't flow out, but accumulates in the refrigerator.
Troubleshooting: Do not adjust the temperature in the refrigerator below 0℃, generally 2-6℃.
This will prevent water from freezing.
Cold drink water or other beverage containers are placed upside down in the refrigerator, or the lid of the beverage bottle is not screwed tightly and crosses the food shelf, resulting in the outflow of beverages.
Exclusion: When freezing drinks, handle them carefully. Plastic containers with caps should be placed on food shelves with doors. If placed on a food shelf, the bottle cap should be tightened to prevent the liquid from flowing out.
Usually, the refrigerator door is not closed properly, or the special sealing strip is damaged, so that the hot air outside flows in and condenses into water.
Troubleshooting: When using the refrigerator, opening and closing the door is an important task, so attention should be paid to prevent cold operation; If the sealing strip is found to be damaged, it should be repaired in time; It is also required to pay attention to whether there is dirt on the door edge and tape at any time, and wipe it off immediately if found.
A temperature sensing probe is installed on the right side of the refrigerator controlled by computer, which can automatically sense the indoor temperature change and the computer system can automatically adjust it. However, if the food is piled up too much and the temperature sensor is blocked, the previous situation will occur, and the temperature in the box cannot be sensed, so that the temperature in the box is too low.