The main function of advertising light box is for publicity. Many businesses will make advertising light boxes when selling products and doing business. There are two kinds of advertising light boxes, one is placed in front of the store, and the other is for publicity. Most advertising light boxes do this. Do you know how to make advertising light boxes? The following small series will introduce you to the production method of advertising light boxes. Friends who want to make advertising light boxes can look at what materials need to be prepared first.

I. Production materials

Keel: made of wood strips, angle iron or aluminum alloy profiles.

Light source: two groups of fluorescent tubes.

Panel: plexiglass color plate or pvc color plate.

Support: triangular iron frame.

Second, making tools.

Electric drill, cross screwdriver, screwdriver, hacksaw, wood saw, shovel hammer, pliers, nails, latex, hook knife, wire saw, plexiglass.

Third, the key points of production

Design: According to the design requirements of customers, the size, color and font of light boxes should be arranged in primary and secondary order, and the changes of pictures and texts should be placed horizontally and vertically. In addition, it depends on the brackets made at the installation site. Based on this design, the size, font and color of each word are calculated and searched.

Keel: generally hexahedron. Material: 20×20 or 30×30.

Angle iron: conditional self-processing, unconditional external processing.

Wood: 2×2 cm square timber is used for nail rack.

Blanking: four pieces in length and four pieces in width, with length, width and less than 0.5cm = wood length. Saw 2× 1 tenon at both ends, paste it with white latex and nail it. Thickness dimension minus two material thicknesses +0.5= thickness length. Then put on white latex and nail it. Water cube channel advertisement.

Aluminum material: the aluminum alloy material of the ground cabinet is the same height, width and length. 45-degree angle saw, connected with plug-in.

Lighting: Generally, two or three fluorescent tubes are used.

40W 1.2 long lamp tube with 1.3m light box. The 30W lamp tube is 0.9 meters long, and is used for light boxes over 1. 1 meter. The thickness is generally 20-25 cm.

Upper plate: when nailing small nails (15MM), drill a small hole with an electric drill first, otherwise the hard nail will crack and nail at the edge of 5MM, and nail three or four nails more than one meter long. Only four nails can be nailed to the 20MM wide side plate. Drill holes in the side to get the wires out.

Aluminum strip: 20×20MM aluminum angle is used, and the length and width of plexiglass plate are better than 2 mm. The aluminum corner head is sawed at an angle of 45, and the screws are nailed on the side, with a thickness of 20MM and regular script on the front. Never see a nail. Paste organic characters: arrange the characters on the surface of the light box according to the design, check them lightly, straighten them, and then paste them with plexiglass glue. There are two ways to paste, one is to glue the organic glue on it, and the other is to suck the organic glue with a medical needle and gently inject the edge. The second one is better than the first one. Check whether there are any typos, missing words and typos, and check whether each word is glued tightly and whether there are any missing words.

Cleaning: Use a small piece of clean cloth, dip it in some water, and then squeeze some toothpaste to wipe it evenly. After wiping evenly, dip a cloth in some water and wipe it on a large area. Water is not easy, but cloth is wet.