The first thing you should consider is how to disassemble it. Here, I will introduce two methods, mass installation and professional installation, to help you understand:

The first is from disassembly to assembly:

1. After receiving the finished product ultra-thin light box, everyone will definitely see the carefully packed bubble paper packaging and wooden frame packaging;

2. First, open the wooden frame and bubble film;

3. Carefully remove the light box and remember not to bump. There are precision ballasts and welded pipes in ultra-thin light box, which are relatively fragile products. Remember not to knock against them to avoid damage, which will lead to problems such as light boxes not lighting up.

4. Open the four sides of the open frame by hand;

5. Take out the transparent organic board with a thickness of 2mm at the top;

6. Gently uncover the mask and bottom film on the organic board, which is a protective film to prevent scratches during transportation and production, and you will see the light guide plate below;

7. Keep your finished light box as clean as possible and gently put it on the light guide plate. Here, everyone should pay attention. Never touch the surface of the light guide plate with your hands, which will lead to marks on the light guide plate, which is very ugly;

8. After putting it in, the gaps left on the four sides should be as equal as possible, and then put the organic board on it transparently. At this point, it is basically completed;

9. Close the frame cover with four open sides and install the light box part;

10. There are two hanging noses on the back of the light box for hanging on the wall hook. This hanging nose can be adjusted at will, without worrying about whether it is suitable for the distance of nails or whether it is suitable for your socket, horizontal hanging or vertical hanging, etc.

1 1. Put a small nail at an appropriate distance and position on the wall. Of course, in terms of distance, you don't have to be too precise. As I said before, the hanging nose behind the light box can be moved.

12. After setting, adjust the distance of hanging the nose, and you can hang it directly. At this point, a complete ultra-thin light box is installed!

The second is the professional ultra-thin light box installation method:

1. 1. Determine the installation position of the light box, and determine the installation method according to the actual situation and the type of light box.

2. Measurement size: According to the position of the mounting hole on the back of the light box or the actual size on site, determine the fixed point for mounting the light box.

3. Fixed light box: a) Aluminum-plastic board, wooden board, iron plate, etc. are used for the wall surface on site. , can be directly fixed with self-tapping screws; B) The wall of the construction site is cement or brick wall, which can be punched with an impact drill first, and then fixed with expansion screws; c)

The site walls are made of tiles, marble, glass, etc. First drill through the surface with a glass drill, then drill the expansion screw hole, and then fix the light box or use adhesive. d)

For the light box that needs to be hoisted or hung on site, after the installation position is selected, the fixed point for installing the light box is determined according to the actual size of the installation hole of the light box, and then the hanger is installed and the grounding wire is connected.

4. Wiring:

The outlet end of the power cord of ordinary light box is on the back. If the on-site power supply is on the back of the light box, you can cut off the plug of the power cord and connect it directly, and the power connector is tied tightly with insulating tape; If the power supply is outside the location where the light box is installed, connect the outlet of the light box power supply to the edge of the light box, and then insert the three-phase plug into the power socket;

5. Fixing the light box: open the upper cover of the light box and install it at a fixed point (that is, drill a hole in the power cord of the light box base with an electric drill, reinstall the power cord and adjust it to a horizontal state with a level);

6. Turn on the light and clean the surface of the light box.

The installation of ultra-thin light box affects the beauty of the light box. In short, if the installation method is incorrect, there will be problems such as tilt, instability and even power failure. How to install ultra-thin light box correctly should pay attention to five points:

First, fully understand the light box installation site, such as location, power supply, installation time, transportation, etc.

Second, the exact size must be accurate and there can be no error, otherwise the installation cannot be completed.

Third, the materials and tools needed to fix the light box.

Fourth, the understanding of the installation facing, such as the material and stress point of the wall.

Five, for the consideration of after-sales maintenance, should be conducive to the follow-up service, can not be nailed to death, to bring inconvenience to maintenance.