There are generally three kinds of dining table turntables, namely manual dining table turntables, electric dining table turntables and automatic dining table turntables without electricity.

First, the manual dining table turntable

Push the dining table by hand to rotate, and you can turning tables with a gentle push. If you push fast, it will turn slowly. If you don't push, it won't turn. It is the most widely used and cheapest dining table turntable, which is convenient and concise.

Second, the electric dining table turntable

The turntable is mainly driven by electricity and can rotate without manpower. Most of them are integrated structures, which are expensive. Once the motor is damaged, the maintenance cost is relatively high, and it is difficult to clean because it cannot be disassembled.

Third, there is no electric automatic dining table turntable.

The main principle is similar to the design principle of Swiss mechanical watch, which is a better substitute for manual dining table turntable at present. It is more expensive than manual dining table turntable, but much cheaper than electric dining table turntable. Because it can be separated from the dining table, it is not only convenient to upgrade the existing manual dining table turntable, but also convenient to clean. It is one of the most idealized dining table turntables at present.

2 dimensions of the dining table turntable

Generally, the diameter of the dining table turntable is about 25-35cm smaller than that of the dining table, so as to ensure that there are enough plates on the turntable and enough space on the dining table to put wine glasses and tableware.

3 Matters needing attention in the use of dining table turntable

First, ensure that the use environment is ventilated and dry, and avoid using it in a humid environment.

Second, when using, check whether the switch, wire and socket are normal to avoid leakage and short circuit during use.

Third, non-professionals are not allowed to disassemble the electric dining table turntable without permission, so as not to damage the internal motor and make the turntable unable to be used normally.

4 Maintenance method of workbench turntable

First, after use, you can wipe the table turntable with a clean wringing rag to avoid dirt accumulation, and also avoid wiping with a wet rag.

Second, you can clean the dust and sundries in the gap of the turntable with a slightly Microsoft brush.

Third, for the electric dining table turntable, the motor should be maintained regularly, and the power must be turned off when not in use.

Fourth, avoid putting the tableware with boiling soup or hot water directly on the turntable of the electric dining table, but put a heat insulation pad under the tableware to prevent the turntable from being burned.

5 Picture of dining table turntable