Current location - Recipe Complete Network - Complete recipe book - How to make a hook for fishing eels
How to make a hook for fishing eels
Question 1: How to make the hook for fishing eel? Find a thin steel wire, sharpen one end of it in the deep bay of 180 degrees, string the bait on the bay when hanging it, and hold the other end in your hand.

Question 2: How to catch the fish hook of Monopterus albus? Use the spokes of a bicycle, sharpen one end of the spokes and bend them into a fishhook shape. The hook door should not be too wide.

Question 3: Who knows how to make a special hook for fishing eel? Just exploding fish. You need more fish.

Question 4: Why didn't you catch the eel hook rope, or didn't catch the heat and pull it out, or called the police?

Question 5: How deep should the hook be inserted into the hole when fishing Monopterus albus? 1 Hard hook: I usually sharpen the rib of an old umbrella and bend it into a hook with a vise. The hook door is about 5 to 7 mm, the hook depth is about 5 mm, and the hook tip is slightly expanded. I usually use it to fish mud pits. (Try not to burn red when bending the hook, which will easily reduce its hardness and tensile strength. Therefore, cold bending is recommended. No matter what kind of hook you use to catch eels, remember that the hook tip is facing down. The so-called downward direction means that the eel grabs the lower jaw after eating the hook, and the lower jaw has a V-shaped bone, which is not easy to crack and unhook after hanging. The upper jaw is hard and not easy to hang firmly, and it is easy to hang and crack after hanging sideways, leading to unhooking. )

2. Soft hook: tie a nylon thread to the hook (other strong threads can also be used), and the size of the hook is similar to that of the hard hook (the length of the hook is guaranteed to be less than 5 cm, and the umbrella bone is ground). However, it is not easy for eels to decouple after eating. I usually use it to dredge mud holes (it is seldom used now).

3. Semi-soft hook: handle with umbrella rib, front end with splayed ring+strong code+fishhook. After the hook is tied with a solid yard, it is tied to the eight-character ring, which is used to prevent rotation. Monopterus albus usually turns after eating and living. I usually use it to fish crevices.

4. Hook: a necessary thing for fishing in crevices, as the name implies, in order to lure eels. Foam and bells can be installed at the end of the hook. This foam is to prevent eels from sinking after falling into the water. The bell is designed to ring when you eat the hook, so you don't have to stare all the time.

5. High shore hook: The netting rod with semi-soft hook is a high shore hook. When fishing for crevices in rocks, some shores are too high for your hands to reach. At this time, the high shore hook comes into play.

Question 6: Who can do the hard hook and soft hook method for fishing eel? Detailed! ! It is better to have pictures or videos! ! ! There are two schools of eel fishing: hard hook fishing and soft hook fishing.

= = = = Let's talk about hard hook fishing first.

First, you need to make an eel hook. The equipment used is steel wire with a diameter of about 2.0mm, length of 40 cm, bamboo length of 40 cm, 0.6PE wire, vise and other tools. Steel wire is very important. Too thin steel wire with poor waist strength is not very suitable. Strength is the first choice. It is better to use steel wire with sufficient toughness but insufficient waist strength than steel wire with sufficient strength. The reason will be explained in the fishing method.

1) I have used the eel hook for 3 years, and I can see that the handle of the hook is red, with a total length of 60 cm, and the center of gravity should be controlled near the tail end, so that it will be more comfortable to hold it when fishing. Explained in professional terms, it can capture the signal of biting hook sensitively and quickly, and "twist" in one go.

Soft and hard hooks are the skills to catch eels! X

2) At the joint between the steel wire and the bamboo handle, the front of the bamboo handle should be cut as close as possible to the thickness of the steel wire, so as to be integrated. The slender bamboo is slightly helpful for capturing signals.

Soft and hard hooks are the skills to catch eels!

3) The joint is about 10 ~ 15cm. Note that the end of the steel wire is bent at a right angle of180 with the direction of the front hook tip, and embedded in the bamboo body for 5MM, which is helpful to provide higher tension.

Soft and hard hooks are the skills to catch eels!

4) Wrap the steel wire and bamboo tightly with 0.6#PE.

Soft and hard hooks are the skills to catch eels!

5) The size of the hook tip varies from person to person, just because of the size of the eel, because of the thickness of the hand, because of the mood. . . . . . . . .

Soft and hard hooks are the skills to catch eels!

6) Rear view, the thickness varies from hand to hand.

Soft and hard hooks are the skills to catch eels!

7) stand up!

Soft and hard hooks are the skills to catch eels!

Let's talk about fishing. The first thing to pay attention to when fishing with a hard hook is that the plane formed by the hook should be consistent with the kissing surface of the eel, which is convenient for it to swallow the eel and bite the hook. Therefore, every time you find an eel hole, you must check it before entering it. At the same time, the direction of the hook tip can also be judged by the combination part (the end of the bamboo handle can also be marked). Teasing is faster than biting the hook and then twisting it 90 degrees (as for which time point and how it feels, only you can slowly understand it). Finally, apply force to the hook tip with the waist force of the steel wire, and the hook will pierce the lower jaw of the eel. Monopterus albus has a hard upper jaw and is not easy to be hooked. It is necessary to control the direction of the hook tip according to its own twisting habits, and this is the technique of fishing Monopterus albus. The toughness is too good. The steel wire is a little backward in force penetration, and the twisting is not enough. Moreover, sometimes the waist strength is not enough when the eel is exposed by the hook, so the steel wire would rather be thick than thin. Of course, the thickness is suitable and the strength is high, and a little toughness is very suitable.

After the eel is hooked, it will rotate quickly in the hole. You must hold the bamboo handle with both hands to rotate with it, otherwise it will be easy to unhook. The good news is that the eel pulls the least downward when it rotates and can be pulled out quickly.

Hard hook fishing is an efficient and fast fishing method, which is suitable for professional fishermen who catch 5 kg 10 a day in A Jin. It is also a fishing method with the highest technical requirements, and few people can fish well.

= = = = Let's talk about soft hook fishing again.

Soft hook fishing is simple, basically reaching the level that individuals can fish, and the success rate is very high. The only difference is finding the eel hole. Let's look at the fishing tackle first.

1) Just use the bamboo stick for barbecue bought in the supermarket, cut one end with a knife, tie a 2 cm long thread and fix the tangent.

Soft and hard hooks are the skills to catch eels!

2) Panorama

Soft and hard hooks are the skills to catch eels!

3) Take a piece of steel wire, the end of which is red, and use a hammer and vise to match the anti-slip part similar to the end of the hook, which is a strong and wear-resistant fishing line on the beach. The steel wire part of the finished product is about 3.5 cm long.

Soft and hard hooks are the skills to catch eels!

4) Panorama

Soft and hard hooks are the skills to catch eels!

5) Tail treatment of fishing line

Soft and hard hooks are the skills to catch eels!

6) Prevent the sliding part from being embedded in the bamboo stick, which is convenient for hole exploration and fiddling. As soon as the eel bites the hook handle, it will slide down from the bamboo stick, which is convenient for the eel to swallow the hook.

As for the fishing method, it is very simple. When you find the eel hole, make a joke. Don't pull the wire after biting the hook. When the eels are dragged into a line or in a circle, you can pull the wire to collect the eels. This fishing method is very simple. It can be used as an auxiliary way of hard hook fishing, which is very suitable for women, the elderly and children to play. . . . . . . Or catch eels while picking up girls, don't spoil the boat!

Top equipment for fishing eels! Attention ... >>

Question 7: What hook is used to catch eels in the crevices of stones? There are many kinds of fishing methods for eels, and each place often has its own unique fishing method. Occasionally, when fishing for carp and crucian carp, you will encounter eels. But it is usually near the gap of stone slope protection in tanggou. If it is specially designed for eel fishing, it is often made by special tools.

You can choose a steel wire with a length of 0.5 m and a diameter of 0.9- 1.2 mm, one end of which is sharpened and bent into a hook shape, and the other end is bent into a circle, and the two directions are best consistent. Steel wire can also be embedded in the stick, but it must be embedded firmly. Find the eel hole before fishing, and then get off the hook when you find the eel hole.

Earthworms are mostly used as bait for fishing Monopterus albus, and the bigger and thicker the better. Put the bait on the hook and find the eel hole, then you can put the hook in the hole. Put it in the hole. Push and pull slowly up and down to lure eels to the bait. If the eel eats the fishhook, it should be pushed inward to make the fishhook fully enter the mouth, then it should be pulled out of the hole at an angle, and the eel's neck should be held with the other hand in time to raise the fishhole.

Another method is to choose a hook with a loop and tie it to a fishing line about 70 cm long above No.5, and the other end of the fishing line is tied to the center of a small stick 15 cm long. Send the hook into the hole with a fork, then straighten the line, put the stick on the ground and mark it. If there is any abnormality, you will know that a fish is eating the hook. Get out in time.

In both ways, be careful not to use too much force when pulling the hook, so as not to open the fish mouth.

April-10 is a good season for eel fishing every year. Midsummer is the golden season. It was better before the thunderstorm. It is best to fish before 9 am and after 4 pm in a day.

One end of 16 #-20 # steel wire is sharpened, bent into a hook shape, and the other end is embedded in a wooden stick or bamboo piece and fixed firmly. The steel wire is left about 30 cm, which is convenient to extend into the hole. Professional fishing generally needs about 10. The bait for fishing Monopterus albus is mostly earthworm, which is as thick as 8# steel wire. Monopterus albus likes to dig a mud hole in the stone slope protection hole in the pond ditch, usually 3-4 cm near the water surface to facilitate breathing. Anyone with moss on the stone can see its traces, because frequent activities will make the moss next to it not grow. I often test it with a straw. Methods: Put earthworms at the root of straws, just like taking the bait, usually a dozen or more, and then insert them into the holes one by one for testing. The water surface should be 15 cm, and the height should be uniform. After insertion, you can look back and see that there are no earthworms in the straw, so you can get off the hook. First pull out the straw, slowly insert the hook into the hole, bite the hook, send it in and then pull it out of the hole. Be quick, throw it to the shore or grab it with the other hand with cotton gloves, otherwise it will unhook quickly. Don't use too much force when pulling the hook, so as to avoid the fish mouth cracking and unhooking. April-10 is the active season of Monopterus albus, so try to avoid getting off the hook at noon.

Question 8: What is the hook for fishing eel? How to do it yourself can be simply understood as an ordinary fish hook, and the hook handle is particularly long.

Cut a piece of steel wire or iron wire and weld a fishhook at the front end.

Question 9: How can the food for eel fishing be put on the hook? If you are in the wild, you can dig a little earthworm and put some mud in a bottle. Father used a long hook when fishing for eels in the field, and put live earthworms on the hook. Be careful when you wear it. Earthworms are alive, can move, and shrink into a circle when they feel pain. Then you have to straighten it bit by bit. It will be particularly easy to catch when it is done, but be careful of snakes! !

Question 10: Can you catch Monopterus albus with a fishhook? Yes, but choose a large size, and it is best to choose the one with a ring on the back handle. It can be tied well and is more convenient.