Baxi wall-hung boiler is a very common household heating equipment, which is convenient to use and occupies a small area, so it is loved by the majority of users. However, some faults will inevitably occur in the process of use. If these faults are not handled in time, it will affect the normal use of Baxi wall-hung boiler. Next, let's take a look at the common fault causes and treatment methods of Baxi wall-hung boiler.
First, there is no hot water or hot water is not hot enough.
If there is no hot water or the hot water is not hot enough, it may be that the gas pipeline is blocked or the battery power is low. At this time, you can check whether there is any foreign body or blockage in the gas pipeline, and try again after cleaning; If the battery is low, replace it in time.
Second, the water pressure is too low.
When the water pressure of Baxi wall-hung boiler is too low, the hot water will be blocked or unusable because the water pressure is not enough to promote the flow of hot water. At this time, you need to replenish water, but be careful not to add too much. Too much water will cause the wall-hung boiler to overheat and cause failure.
Third, the combustion of wall-hung boiler is unstable.
Unstable combustion is usually manifested as fire jumping or flameout, probably due to blockage of gas pipeline or gas valve, or excessive oil pollution. At this time, you can open the gas valve to check whether there is gas entering, and at the same time check whether there is oil pollution or blockage in the gas pipeline, and clean it if necessary. If the above problems do not exist, the nozzle may be damaged and need to be replaced.
Fourth, the water pipe leaks.
If the water pipe leaks, it may be a problem with the water pipe joint or the pipe is aging. At this time, it is necessary to readjust the interface of the water pipe. If the problem still exists, you need to replace the hot water pipe.
The above are the common faults of Baxi wall-hung boiler and their solutions. If you encounter the above problems, you can investigate and deal with them according to the prompts. If the problem cannot be solved by itself, it needs to be repaired by professional technicians. At the same time, the use of wall-hung boilers should also pay attention to safety. If the smoke is greasy during use, it should be cleaned in time to avoid potential safety hazards.