How do you build a pigeon coop?

Question 1: How to build a pigeon coop

This may help you better!

Question 2: How to build a pigeon coop with wire? 20 points

Go to the hardware store to buy wire mesh, the size of the square grid have, ten dollars or so meters, the length of the size of their own. Use the wire to tie the edges.

Question 3: How to build a pigeon cage

The construction of pigeon lofts should be based on pigeon breeds, age, breeding purposes and breeding conditions and other factors for overall consideration. Common pigeon lofts are roughly of the following five types.

This kind of loft is simple in structure, less investment, and the scale can be big or small due to the condition. The general pigeon breeders take this way. The walls of the loft are generally brick or wood structure, which is good for heat preservation and insulation. Sitting in the north and facing the south, the sunny side of the door and window can be larger, in order to facilitate the light, ventilation, warmth. Window screen or wire mesh should be installed on the outside of the window to prevent the invasion of pests or mosquitoes and flies. Pigeon lofts are generally built in a single row of bungalows, each 12-18 meters, 5 meters wide. According to the purpose of rearing, it can be divided into several rooms, generally 12-18 square meters per small room, can keep 25-35 pairs of meat pigeons, commercial meat 40-60 pairs. The front window of the loft should be lower, and the back wall should have two ground windows at 40 centimeters from the ground. The roof is single-slope, 210cm high in front and 150-180cm high in the back, with a roof under the roof, which is good for heat preservation in winter and heat insulation in summer. The floor can be paved with cement, slightly sloping forward, which is convenient for washing, cleaning and sterilizing. In front of the loft, there is a 1-meter wide passageway with a drainage ditch 30 centimeters wide and 5 centimeters deep. In front of the ditch is the sports ground, which is surrounded by a 50-70 cm high fence, surrounded by a wire or plastic rope net, and covered by a wire or plastic rope net on the top. In front of the window of the loft, there should be a perch for the breeding pigeons to perch and mate. Inside the pigeon loft without perches, the back side of the loft is built into 3-4 layers of pigeon nests with bricks, the specification of which is 30 centimeters high and 50 centimeters long and wide. Some trees can be planted in and around the sports ground for shade. In summer, a pergola is built in the field, the ground in the loft can be paved with sand, and the size of the sports ground should be 1.5-2 times the area of the loft. And place perches, food troughs, health care mortar, drinking fountains and bath tubs. In cloudy and rainy days, you can move the feeding trough, health care mortar and waterer into the house, or you can put two sets of them. 1/3 of the sports ground should be covered with fresh gravel so that the pigeons can have a sand bath.

Off-ground group rearing pigeon lofts These pigeon lofts are mostly single-column type, each column of pigeon lofts is generally 20 meters long and 5 meters wide, the lofts can be separated into 5-6 small rooms, each small room to raise breeders of pigeons of 30 pairs or so, the lofts in the north of the channel to stay 1.5-1.8 meters, the south of the wire mesh or plastic rope nets surrounded by the fence, and then in each column of the mesh from the ground at 50 centimeters to 2 cm × 2 cm of the wire mesh flat up for breeding pigeons activities, this is easy to manage, so that the pigeons can be moved into the lofts, and also can set two sets. The breeding pigeons can move around, so it is easy to manage, and at the same time, avoid the breeding pigeons contacting with the feces, so as to reduce the chances of contracting diseases. In the south of the loft, there is a sports ground, which is extended by the fence of each small room in the loft. The sports ground can be made into off-ground type or flat raising type, if it is ground flat raising, it is better to make it into cement ground or sandy ground with strong water absorption, which is convenient for cleaning and washing. In addition, there is a door on the south side of each small pen, which is convenient for the management personnel to enter the feeding and catching pigeons. The structure of each small pen, in the north side of the 45 nests, each pair of pigeons a nest, its specifications for the width of 40 cm, 50 cm deep, 40 cm high, each nest from the ground 15 cm at the nest set up laying eggs. The nest box in the house is changed into a perch, you can raise young pigeons for breeding.

Double-cage type pigeon loft is also called Zhongshan type pigeon loft. In Guangdong Province, Zhongshan, Zhuhai and other places are more common, its structure is characterized by the installation of two rows of pigeon lofts in the pigeon loft next to the wall, the inner and outer cages are connected. The loft is 20-30 meters long, 3 meters wide, 3-3.4 meters high, with a wall height of about 2 meters, herringbone roof frame and bell-shaped roof. The middle aisle of the house is 2 meters wide, and on both sides of the aisle is a "V"-shaped gutter 50 centimeters wide and 30 centimeters deep, and four overlapping inner and outer cages are installed on the top of the house. The inner cage is a place for the laying pigeons to feed, lay eggs, hatch, raise chicks, and take a rest, while the outer cage is a place for the pigeons to mate, play sports, and take a shower. If you have the condition, you can install a perforated water pipe on the top of the cage, so that the pigeons can take a bath when spraying water and prevent the summer heat from cooling down. Below the cage is a drainage ditch 60 centimeters wide and 40 centimeters deep.

Single-cage lofts are more common in Guangzhou, Shenzhen, Conghua and other areas of Guangdong Province, characterized by one cage for each pair of parent pigeons, and the lofts are generally larger, and are the more common lofts for rearing commercial meat pigeons. The size of the loft is suitable for each breeder to manage 300-400 pairs of laying pigeons, generally 40-50 meters long and 5-7 meters wide. Surrounding walls can be built into an open type, conducive to heat ventilation, hanging activities in the periphery of the color nylon cloth, if necessary, put down the sun and cold. The pigeon cage is a single cage with a 1.2 meter working path, and the feeding trough, water trough and health care sand bowl are located in the front of the cage. In order to prevent feed and feces contamination of drinking water, the width of the feeding trough should be larger, between the feeding trough and water trough with wooden boards and fiber boards and other things to block, leaving only two 4 cm gap in each cage, so that the pigeons can stretch out ...... >>

Question 4: How to build a pigeon cage

Use wire mesh, I have pigeon cage pictures to show you

Question 5: How to build a pigeon cage

Use wire mesh, I have pigeon cage pictures to show you

Question 6: How to build a pigeon cage

There are professional weaving of bird cages. General grocery stores also sell

Question 7: How to build a pigeon coop

wire mesh, I have pigeon coop pictures to show you

Question 8: How to build a pigeon coop

I once built a pigeon coop outside with wooden strips, wire mesh, and inside the fire bricks to build the spawning house

Question 9: How to build a pigeon coop

! The question is: How do you build a pigeon coop?