The use of various bottle openers will definitely be familiar to people who drink a lot. There are various bottle openers on the market, but people who don't drink a lot may not know much about the use of bottle openers, so now share the use of various bottle openers!

How to use various bottle openers 1 butterfly bottle openers

1.Place the paper cutter at the top of the bottle, clamp the bottle mouth with a blade, and turn it 90 degrees to cut the protective paper;

2. Insert the bottle opening needle into the bottle from the middle of the cork, and protect the bottle mouth with a plastic protective sleeve;

3. Move up and down to inject air into the bottle until the cork slips out of the bottle mouth (usually every bottle of wine can be opened 4-7 times);

4. Use the small plastic slider on the protective sleeve to withdraw the cork from the air needle.

Vacuum bottle opener

Put the cutter on the top of the bottle, clamp the bottle mouth with the blade, and turn it 60 degrees to cut the protective paper. Insert the bottle opening needle into the bottle from the middle of the cork, and protect the bottle mouth with a plastic protective sleeve. Move up and down to inject air into the bottle until the cork slips out of the bottle mouth (usually 4-7 times per bottle of wine can be opened. Use the small plastic slider on the protective sleeve to withdraw the cork from the air needle.

Wing bottle opener

Wing-type bottle openers are widely used, which can be divided into two types: single wing and double wing. The more common one is double wing. The function of "wing" is mainly to take out the cork by using the principle of lever straight teeth. The use method is similar to that of seahorse knife, but don't hold down the wings when drilling the screw drill into the cork. When drilling to a certain depth, hold down the wings and close them together, and finally pull them out hard.

Rabbit ear bottle opener

Rabbit-ear bottle opener is a kind of quick bottle opener. The handle used to clamp the bottle neck of wine is named after rabbit's ear. After the "rabbit ear" handle grips the bottleneck, it quickly presses down the pressure bar to make the auger quickly enter the bottle stopper, and then pulls back the pressure bar to make the bottle stopper come out.

Insert bottle opener

Plug-in bottle opener is rarely seen, which belongs to a relatively old and primitive bottle opener. Its use method is: insert the thin steel sheet into the joint between the cork and the bottleneck, and then rotate it hard to clamp the cork and pull it out. It is generally used when the cork is rotten and it is not suitable to use an auger. Because of the pneumatic bottle opener, this bottle opener is used less.

Sleeve bottle opener

Sleeve bottle opener is also one of the most commonly used bottle openers, which can be divided into manual and electric. Drill the auger into the bottle stopper and pull the bottle opener upward to easily pull it out.

Ah-So bottle opener

Ah-So is a very convenient and reliable wine bottle opener. Usage: insert two iron pieces of Ah-So from the gap between the cork and the edge of the wine bottle; Apply force to the left and right respectively to slowly insert the iron sheet as a whole; Slowly rotate from right to left and pull out the cork.

How to use various bottle openers 2 Spiral bottle openers:

1. Align the yellow sector knob with the cork and screw it down vertically and forcefully-be careful not to tilt it-until the metal screw can be seen at the center of the lower end of the cork.

2. Slowly and forcefully twist the yellow plastic cap at the lower end of the fan. At this time, the cork will gradually rise from the bottle neck with the yellow plastic screw cap and exit the bottle mouth, and it will be OK.

Please note: you can't give up the second step and pull it out with a strong force, so it is difficult for people or women with small strength to pull it out; A strong person may simply pull the wire out of the cork, and the cork will not move, just like a slippery wire, and it will not work so well if it is screwed in again.

Pneumatic bottle opener:

1, put the paper cutter at 90 degrees on the top of the wine bottle, hold the bottle mouth with a blade and rotate it to cut the foil paper;

2. Insert the bottle opener needle into the bottle from the middle of the cork, and protect the bottle mouth with a plastic protective sleeve;

Electric wine bottle opener

1, aim the paper cutter at the bottle mouth, and turn it gently for one turn to cut the tin foil on the bottle stopper.

2. Align the bottle opener vertically with the bottle stopper and press the down key, and the bottle stopper will automatically rise.

3. Press the up button, and the cork will automatically exit and open.