The halogen moisture detector refers to the traditional classical physical moisture determination method (oven drying method), and the moisture content of the sample is determined by the perfect combination of weighing sensor and halogen (infrared) radiation source. Halogen (infrared) radiation source is to inject inert gas halogen into the original infrared radiation source, so that the infrared radiation source has a long life and a more uniform temperature. When the instrument is determined, the annular halogen infrared heating source is used to quickly dry the sample; During the drying process, CSY series rapid moisture analyzer continuously measures and instantly displays the lost weight of the sample and obtains the moisture content%. After the drying procedure is completed, the final measured moisture content value is locked and displayed. Compared with the international oven heating method, halogen (infrared) heating can dry the sample evenly and quickly at high temperature, and the surface of the sample is not easy to be damaged. The detection results are in good consistency with the national standard oven heating method, and the detection efficiency is much higher than that of the oven heating method. Intelligent operation, general samples can be determined in just a few minutes, and it is a new type of rapid detection instrument.

Why is there a moisture difference between 0,3g and 0,4g?

Calculation formula of moisture meter:

Divide the weight of volatilization by the total weight of the sample multiplied by 100% to get the moisture content of the sample.

If the weight of volatilization is 0.3 and 0.4, the total weight of the sample you put in is 10g.

The error of 0. 1g is 1% of the total sample weight 10g.