The correct way to adjust the drift is as follows:

1. Determine the half-water depth

To determine the half-water depth, we need to determine the depth of the water, the method is to wrap the very heavy lead, after casting the rod into the water, the float is adjusted to the surface of the water exposed to the 1, 2 eyes. The depth of the water is the depth of the lead to the float, and then pull the float down about 2 times the length of the line, so that the half-water depth is determined. Remember, the half-water depth is not half the depth of the water, but the closer to the bottom, the more accurate.

2. Determine the setting

The setting needs to take into account the weight of the bait and the fishing aim. That is to say, if the bait is heavier, the adjustment should be higher. If the adjustment is too high, the fishing eyes will definitely be high, and the adjustment is too low, the bait has no eyes, and you can only start fishing from the bottom of the double bait.

3, weighing the bait

Bait weight is a very important factor for drifting, so after the empty hook adjustments, we have to look at the bait weight. If you know the weight of the bait, you know the fishing aim. If you hang a double bait, no eyes, obviously the adjustment is not determined. Or hung double bait is 8 eyes, then fishing eyes can only be higher, not suitable for most people to see the drift habit.

4, to determine the fishing aim

To determine the fishing aim, from the point of view of gravity and buoyancy, the pull on the float becomes smaller, which means that to touch the bottom. We want to determine how many eyes fishing, in fact, is to set a double bait state. If you want to fish one bait to the bottom, fish between 4-7 meshes, if you want to fish two baits to the bottom, fish more than 7 meshes.

Fishing how to drift the correct drift method

1, lead to find the bottom

Find the bottom is always the first step of the drift, regardless of the method of drifting, because find the bottom in order to determine the depth of the half-water, in order to determine the depth of the water, and at the same time look at the depth of the fishing point around the shallow situation, whether to hang out on the bottom of the can be roughly try to find out.

2. Pull down the float

To be on the safe side, it is often 1.5-2 times the distance of the subline. The first space bean of the float seat can be left on the bottom finding position, and when you hang the bait to find the bottom later, the bottom finding will be between the 2 space beans, and the bottom finding will be very fast too.

3. Determine the aim

There is a formula that can be referred to, fishing aim = aim - double bait weight. This formula can be seen, the fishing purpose of the high and low with the adjustment of the eye and bait weight have a relationship, and in turn to determine how much the adjustment of the eye, also need to consider the bait weight and fishing eye.

4, weighing the bait

Bait weight may hang double double bait no mesh, can also have mesh. If there is no eye number you fish a few eyes double bait are in the end, but you only know double bait are in the end, in the end what state is still not clear.

5, find the bottom to determine the fishing aim

The last step is to find the bottom, find the bottom is the essence of the drift. We fixed a space bean in the lead pendant when we were looking for the bottom, and the float pulled down 1.5-2 times the length of the subline, so that we don't need to try too many times to find the bottom.