Current location - Recipe Complete Network - Food world - How to make a birdcage?
How to make a birdcage?
Preparation materials: plastic bottles, wire hangers, fine wire, small sticks, knives and bird food.

1. Cut the wire hanger and drag it into a straight line.

2. Bend the steel wire hanger into a 90-degree straight line according to the width of the plastic bottle.

3. Wrap the wire hanger 360 degrees around any stick.

4. Break the open end of the steel wire hanger with pliers and recycle it according to the width of the plastic bottle.

5. According to the length of the bottle, bend the long iron wire inward by 90 degrees.

6. Remove the redundant part of the bent steel wire hanger.

7. Put the finished wire on the plastic bottle, open two holes at the designated position, and press the screw to fix it.

8. Make more holes in the tail and bottom of the plastic bottle according to the position of the wire.

9. Open the tail of the plastic bottle in a trapezoid shape at the tail. The position of the black line in the picture below.

10. Tie the bottom of the cut plastic bottle with a rope at one end of the wire.

1 1. Tighten the upper end of the wire and the plastic bottle.

12, half open the plastic bottle with a knife, which can jam the wire.

13. Stick a small wooden strip about the width of the plastic bottle on the lower side of the plastic bottle.

14. Hang the clothes rack above the plastic bottle with a thin wire.

15. Put in the bait. When the bird enters, pull the thin wire to close the bird trap, so that the bird trap is completed.