Cimatron e 14 permanently cracked version installation tutorial:
1. Download and decompress the original program, Chinese patch, authorization file and installation video of cimatron e 14;
2. First, configure software operating environment and run Cim Cracking+Shielding 931reg; Eastry. reg？
Supplementary note: If more than one computer in the LAN is installed with Ci 14, which makes it impossible to access the intranet, you can manually change different computer names, just make sure that the first letter of the computer name is U and the last letter is R, such as u 123ser, uccdr, etc.
3. Run Ci4-Ajuste.exe and restart the computer;
4. After restarting the computer, open the folder "Test 93 1 after startup" and use the test instructions of test 93 1.
① Double-click 212.25.91.137 to detect 93 1.
Test result: general failure, indicating that 93 1 was successfully shielded and the window was closed.
Test result: The request time-out or other prompts indicate that shielding 93 1 was unsuccessful, so you should run the registry again and restart the computer.
②. Double-click 52. 184. 188.438+0 to detect 9438+0.
Test result: general failure, indicating that 93 1 was successfully shielded and the window was closed.
Test result: The request time-out or other prompts indicate that shielding 93 1 was unsuccessful, so you should run the registry again and restart the computer.
5.cimatron e 14 software can only be installed after the above ① and ② tests are successful.
If the shielding is successful or not, continue to operate and run the steps in step 2 and step 4 (ignoring step 3) until the shielding is successful, and then install the software.
6. After successful shielding, right-click the administrator to run the installation package and patch for installing cimatron e 14. Double click \ msvbcrt _ x86.exe _ AIO _ 2017.10.25. This is the running environment. If you have installed these environments, you can ignore them.
7. Double-click \ cimatron \ disk1\ setup.exe to install. Please note that it must be started by the correct administrator.
8. Click "Continue Installation" to continue;
9. Select the installation directory and install according to the prompts;
10. After the installation, the activation interface will pop up. Click "Finish" directly to skip;
1 1, double-click \ patch+localization \Cimatron 14 localization package. Please use exe to install. ?
12, binding network card number
Method for bin network card number
1.Windows7 system?
(1) The physical network card number is set to (MAC)AC220B82D50 1.
(2) E 1 1 and Ci 14 network card numbers have been installed.
1. Install two VirtNet virtual network card drivers, which are included in the installation package.
2. The first one is CE11virtnet: 3085a994cf91.
3. The second one is CI14 virtnet # 2: AC 220B 82D501.
Second, Windows8 or 10 update system
(1) The physical network card number is set to (MAC)AC220B82D50 1.
(2) E 1 1 and Ci 14 network card numbers have been installed.
1. Install the 1 VirtNet virtual network card driver (in the attachment).
2. Bring your own network card driver, and the network address is: AC220B82D50 1.
3. The first one is CE11virtnet: 3085a994cf91.
The physical network card number AC220B82D50 1 is set as follows:
1. Find the actual network card in Control Panel → Device Manager → Network Adapter, and then right-click or double-click to enter the properties.
2. In the Advanced tab, check whether there are "network address", "MAC address" and "network address".
3. Click OK to check whether the modification is successful.
E 1 1 and Ci 14 network card number installation drivers have been installed:
Open Device Manager, select network devices, click Operation Navigation, and select Add Obsolete Hardware.
Choose to install from disk manually;
Select netvietnet to install the driver of D:\ crack \VirtNet virtual network card in the compressed package.
Continue to find the driver we installed in the device manager, as shown in the figure, and right-click to select Properties.
Click advanced and enter the network card number 3085A994CF9 1.
13. Copy and paste the folder Ci 14_Crack to drive C.
14, run Ci 14 in the main program directory of cimlicmanager.exe.
(default: \ program files \ 3dsystems \ cimatron \14.0 \ program \ cimlicmanager.exe)
Specify the authorization directory as the Ci 14_Crack folder in drive C, click the Save button, and then close the authorization manager.
15, run Ci 14 under the main program of GetNodeIDs.exe.
(default c: \ program files \ 3dsystems \ cimatron \14.0 \ program \ getnodeids.exe)
See if the key value in the third line is 02tqab110a71c400833b30e0.
If it is, it means that the crack is successful; If not, please repeat the above steps 17, 18 and 19.
16, start Cimatron 14, and close Cimatron 14 after startup.
17, delete 3dsystemupgraded.exe (default c: \ program files \ 3dsystems \ cimatron \14.0 \ program \ 3dsystemupgraded.exe) under the main program of Ci 14.
18, run the software again, and you can see that the authorization activation is completed. This is the installation tutorial of cimatron e 14 permanently authorized Chinese cracked version. I hope it helps you.