2. Water supply: one end of the delivery water inlet pipe is screwed with the water inlet pipe connector of the ice maker, and the other end is connected with the ice making water;
3. Drainage: One end of the distributed PVC hose is connected with the plastic connector for ice machine drainage, and the other end is led into the sewer respectively, and the sewer is lower than the drain port;
4. Start-up: Plug in the power supply and turn the power supply under the transom to the "cooling" position, and the machine will enter the full-automatic ice making state.
Installation requirements of ice maker
1, the machine should be placed in a place where the air is clear and far away from the heat source, and the surrounding environment should be not lower than 10℃ and not higher than 40℃;
2. When placing, please use the bottom corner bolt to adjust the machine to make it horizontal in front, back, left and right;
3. The water temperature of the water supply should be not lower than 5℃ and not higher than 35℃, and the water pressure should be not lower than 138Kpa and not higher than 550Kpa. Please don't start the machine when there is no water or water shortage;
4. Please use drinking water source for ice-making water supply, and install water filter in the water source to prevent scale formation, filter out precipitation and improve the taste and purity of ice;
5. The use of power supply is consistent with the nameplate of the machine, and the power socket must have a grounding device. Each ice maker is equipped with an independent fuse and circuit breaker.
The above is the installation method and requirements of the ice maker. I don't know if you have learned it. If you feel trouble, you can consider finding a professional master to install it on the platform of Xiudada. Now you can get 200 red envelopes when you register. If you want to know more home information, please continue to pay attention to home after-sales service.