1, cut off the head and tail of the plastic beverage bottle, and then draw a uniform strip in the middle of the bottle with a knife, leaving equal parts at both ends, and don't cut through. Do this well, press the two ends to the middle, and you can see the prototype of the lantern.

2. Find two bottle caps similar to the bottle body, punch holes in the middle, put them on both ends of the bottle body, thread them with thread, silk or iron wire, and tie them at both ends to make lanterns.

3. If you want to beautify, carve what you like when you draw the bottle.

You can also find a cable with five or six iron wires in the middle, leave a few centimeters at both ends, remove all the skin in the middle, and then slowly pull out the iron wires and trim them into lanterns.

5. Paste the drawing paper that you think looks good, then cover both ends with bottle caps or other round things and tie it up with a thread from the middle.

Exercise 2:

1, cut the long paper roll in half, because I made a small lantern, so the red rectangular colored paper is smaller.

2. Cut the middle part of the rectangular colored paper into strips with equal width.

3. First, stick a circle on both ends of the paper roll with double-sided tape, and then stick a circle on the colored paper cut in front.

4. Take out a rectangular piece of paper and fold it in half, then cut it into fine whiskers with scissors and make the ears into a circle with double-sided tape.

Finally, string all the parts together with needle and thread, and you can see that a three-dimensional red paper lantern is finished.

Exercise 3:

1. Install the bamboo strips on the bamboo head base with iron wires.

2. Put a bamboo stick on a groove, and finally tie the bamboo head with iron wire to form a bamboo frame.

3. Lean against the ground and slowly put down the bamboo frame until it becomes a tube.

4. Fold the bamboo stick by hand and adjust the shape, curvature and spacing of the lantern bamboo stick.

5. Tie cotton thread on the top of the lantern to fix the bamboo stick.

6. Spread the white yarn on the bamboo strips and fix it with paste.

7. When the gauze is dry, apply watercress glue.

8. After drying in the shade, a cylindrical umbrella lamp is formed.

9. Then draw and draw. Generally speaking, the characters are scarlet, and the pictures are auspicious paintings, such as the Eight Immortals crossing the sea and Fu Lushou's Samsung.

10. Finally, put the base on the bamboo head and decorate it, and it is finished.