The following is an example of knotting beads. The knotting method of walnut bracelet is the same.

Tools/raw materials: rope, bracelet.

1. First, tie the rope and squeeze it into four strands, as shown in the picture below.

2. It should be pressed tightly and not loosely, as shown in the figure below.

3. Press the top direction and counterclockwise direction, as shown in the picture below.

4. Form the following pattern, as shown in the picture below.

5. Follow the picture step by step, as shown below.

6. Go around in the direction of the arrow, as shown in the picture below.

7. Go around again, as shown in the picture below.

8. Still wrap according to the direction of the picture, as shown in the picture below.

9. After passing through, tighten it firmly, as shown in the picture below.

10. It is basically formed, as shown in the picture below.

12. Finally, pull out the small circles in the four directions and position them successfully, as shown in the picture below.