Current location - Recipe Complete Network - Healthy recipes - Chicken leg mushroom planting technology
Chicken leg mushroom planting technology

According to the direction of the mushroom shed to build beds, digging 80-100 cm wide, 15-20 cm deep mushroom beds, the work road is 0.5 meters, and then 150 grams of lime powder per square meter of beds. Chicken leg mushrooms can be cultivated in both spring and fall, first in the mushroom bed to spread 1 layer of 5 cm thick culture material, and then sprinkle 1 layer of strains, so *** paved 3 layers of material, sprinkled 3 layers of seeds, material thickness of 15-20 cm, the amount of seed sowing is 15-20%, covered with plastic film and newspaper, the development of bacteria.

First, build the border

According to the mushroom shed towards the construction of the border, the interval of 0.5 meters of the work road, in the greenhouse dug 80-100 cm wide, 15-20 cm deep mushroom beds, the length of any length. Water the bottom water thoroughly and sprinkle 150 grams of lime powder per square meter of the bed.

Second, sowing

1, the chicken leg mushroom is a grass-rotting, high-temperature large-scale fungi, mycelium growth at a suitable temperature of 24-28 ℃, the appropriate temperature for the occurrence of the substrate for the 15-18 ℃. It can be cultivated in both spring and fall, fall cultivation is generally from June to August, September to early December more than two months to produce mushrooms, spring cultivation is generally from November to February, April to June, mushrooms, this time period cultivars need to be properly heated to develop mushrooms.

2, sowing the general 3 layers of material 3 layers of seeds, first in the mushroom bed to lay 1 layer of 5 cm thick culture material, and then sprinkle 1 layer of strains, so *** paved 3 layers of material, sprinkle 3 layers of seeds, the thickness of the material is 15-20 cm, the amount of seed sowing is 15-20%. After sowing, cover the disinfected plastic film and newspaper, for germination management.

Third, the development of bacteria

Through the plastic film inserted 1 thermometer in the material at a depth of about 10 centimeters, in order to observe changes in the material temperature, from the fourth day of inoculation, lifting the film every day to make it ventilate, pay attention to the 10-centimeter material temperature shall not exceed 25 ℃, the temperature is maintained at 25 ℃ or less is appropriate. If the temperature of the material is high, it is necessary to carry out ventilation, strengthen the ventilation of the shed at night and the ventilation under the film, you can also uncover the newspaper and spray the appropriate amount of water to cool down the temperature. 20 days or so, the chicken leg mushrooms mycelium can be covered with the material layer.

Four, harvest

1, with the continuous development and growth of the child entity, the requirements of the growth conditions are also gradually rough, at this time, the temperature of the shed to maintain at 15 ℃ or so, the air humidity of 85-95%, the light can not be too strong, the light is too strong easy to make the child entity prematurely produced and rolled over the scales, and to make the mushroom body deepen the color and lustre.

2, with the development of the mushroom body ventilation should be strengthened, but the same can not have a strong wind blowing into the shed. When the mushroom body is solid, the cap has a few scales and tightly wrapped stipe, the ring is just beginning to loosen, about seven minutes of maturity should be harvested, harvesting is not timely, the substrate will be autolytic black, do not spray water within 4 hours before harvesting, so as not to hand pinch the mushroom body at the discoloration, the harvesting of the lower part of the stipe, gently rotate and pull up.