1, unzip the downloaded software and run it. Note: Just double-click to run it under WinXP system. For Win7 and Win8 systems, please right-click to run as an administrator.

2. After inserting the USB flash drive, click the button to make USB startup disk, and a prompt box will pop up to confirm whether to continue, and then start making after confirming that the selected USB flash drive has no important data.

3. Wait a few seconds, and you will be prompted if the production is successful.

2. Copy the downloaded system to a USB flash drive.

Copy the downloaded GHO file or the ISO system file of GHOST to the folder of U disk "GHO". If you just reinstall the system disk without formatting other partitions on the computer, you can also put GHO or ISO in a partition other than the hard disk system disk.

3. Enter the BIOS and set the U disk as the first startup item.

1, press the "del" or "F8" key to enter the BIOS settings when the computer starts, and the shortcut keys for entering different BIOS are as follows:

2. Select Advanced BIOS Settings AdvancedBIOS Features.

3. After entering the interface of AdvancedBIOS Features, select the Hard Disk Boot Priority.

4. Hard DiskBoot Priority selection: Use the plus and minus signs "+,-"on the keypad to select the mobile device, and select the U disk at the top. Then, press ESC to exit and return to the setting interface.

5. Friendly reminder: The BIOS setting method of computer motherboards at different times is different. If it is not the above BIOS setting, please refer to the graphic tutorial of setting USB flash drive as the first startup item in different BIOS.

4. Start the quick installation system with a USB flash drive.

There are two ways to install the system, one is to install in the PE system, and the other is not to install in the PE system.

(The first method) Enter the PE system for installation.

1, enter the PE system, double-click to run the one-click installation of Chinese cabbage, then select the system image you just downloaded and the partition you want to install, and click OK.

2. In the pop-up prompt box, select Yes.

3. Enter the automatic installation interface, and now just wait for the restore to complete and restart.

(second) Do not enter the PE installation system:

1, rename the GHO system file to be installed in the GHO folder of the U disk to "DBC.GHO".

2. Restart the computer to enter the selection interface, and select 05 to enter the Ghost backup and restore the multi-system all-in-one dish.

3. Then select 0 1 not to enter the first partition of the hard disk in the PE installation system GHO in the entered interface.

4. According to the interface prompts, type 1 to automatically complete the installation.