One, before the production of software, hardware preparation

Two, with the cabbage U disk installation system software to create a boot U disk

Three, to download the gho system files you need and copy them to the U disk

Four, into the BIOS set the U disk boot sequence

Five, with the U disk boot quickly install the system

The U disk boot system

The main steps:

The main steps of the U disk installation system

The main steps of the U disk installation system are as follows p>Detailed steps:

One,: the production of software, hardware preparation

1, U disk a (recommended to use more than 1G U disk)

2, download the cabbage U disk installation system software: cabbage U disk installation system tools to download the home page

,/

3, download you need to install the ghost system

Two Windows

Windows

XP system directly double-click to run it, Windows

Vista or Windows 7/8 system, please right-click to run as administrator.

Click to enter the cabbage U disk installation system - program download and run

2, after inserting the U disk click on the "one key to create a USB boot disk" button, the program will prompt whether to continue to make sure that the selected U disk no important data to start making:

3, the process of making the process do not do other operation so as not to cause production failure, the production process may appear a short pause, please wait a few seconds, when prompted to produce the completion of the safe deletion of your USB flash drive and re-plug the USB flash drive can be completed to start the production of the USB flash drive.

Three, download the gho system files you need and copy them to the USB flash drive

Copy the GHO file or GHOST ISO system file you downloaded to the "GHO" folder on the USB flash drive, or if you are just reinstalling the system disk and don't need to format any other partitions on the computer, you can also If you are just reinstalling the system disk and don't need to format other partitions on your computer, you can also put the GHO or ISO in a partition other than the system disk on your hard disk.

Four, enter the BIOS set U disk boot sequence

Computer boot press "del" or "F8" key to enter the BIOS setup specific settings see

Dabai USB flash drive setup U disk boot tutorial

Dabai USB flash drive setup USB flash drive The first method is to use a U disk to install the system

(the first method) into the PE with intelligent installation tool installation: