How to Use Citric Acid DescalerAdd the right amount of citric acid powder to a certain amount of warm water, stir well until dissolved and then use.

Pour the citric acid solution into the container or surface that needs to be cleaned, such as the sink, kettle, washing machine, etc. Allow the solution to fully contact the limescale part, you can use a brush or sponge to gently scrub it, so that the citric acid solution can act as a descaling agent. Wait for some time (usually 10-15 minutes), and then rinse thoroughly with water.

Apply the citric acid solution to the rusted part and let the solution soak in fully. You can use a brush or rag to gently rub it to help the citric acid solution work. Wait for some time and then rinse it off thoroughly with water. If the rust is more severe, it may take several treatments to remove it completely.

It is important to note that citric acid is corrosive, so you should wear gloves when using it and avoid contact with your eyes. In addition, citric acid solutions gradually lose their effectiveness when exposed to air for long periods of time, so it is recommended that freshly prepared solutions be used and that containers be rinsed clean promptly after use.

Precautions for using citric acid descaler

1, protective measures: Before using citric acid descaler, you should wear acid-resistant gloves and goggles and other personal protective equipment to avoid citric acid splashing into the eyes or contact with the skin causing irritation.

2, ventilation environment: the use of citric acid descaler, should ensure that the use of the environment is well ventilated, in order to avoid the inhalation of excessive citric acid vapors on the respiratory system caused by irritation.

3, configure the concentration: according to the need for citric acid powder or liquid mixed with the right amount of water to make descaling agent. When configuring the concentration, follow the recommended ratio and method of the manual to avoid excessive dilution or concentration, which will affect the descaling effect.

4, the use of methods: citric acid descaling agent evenly coated or sprayed on the surface to be descaled, leave it for a period of time, and then rinse thoroughly with water. In the process of use, you can use tools such as brushes or sponges to assist in cleaning, but be careful not to over-exert yourself so as not to scratch the surface.