If you can't draw, please refer to the following:
Bean paste painting, also known as bean relief painting, originated from the folk custom of painting with grains. On the basis of folk, we should innovate according to the true colors of beans, and make full use of the inner and outer shells, shapes, beanstalks, beanstalks, lines and natural colors of various beans and grains. Today, let's take a brief look at how to make this kind of painting.
Bean paste can improve children's hands-on ability and thinking ability, so how to do it? Today, Bian Xiao will give you a brief introduction.
First of all, prepare materials: a piece of plywood (depending on the size of the box), various seeds (such as sunflower seeds, lentils, wheat, flaxseed, etc. ), tweezers, glue, plastic, scraper, tool knife, varnish, brush, pencil, chopping board and paper.
Method steps:
First of all, we must determine the size of the frame and design the pattern. If you are not good at drawing, you can select a picture, then take a piece of paper with the same size as the picture, divide the selected pattern into the same number of squares, and draw it accurately on the paper according to the lines in the original squares. Square and so on
Then cover the plywood with patterned paper, fix it with thumbtacks or tape paper, and then draw the pattern heavily with a pen, leaving clear lines on the plywood. According to the different appearance and texture of seeds, the whole idea is carried out to determine the various parts of seed arrangement. Some seeds can be split with a knife. For example, the finer the degree of sunflower seeds, the higher the accuracy.
Next, apply a little glue to the board and spread it evenly with a scraper. Then fill in the seeds in each part from top to bottom. According to the size of the seeds, the big ones can be evenly spread on the designated parts by hand or tweezers, and the small ones can be made of paper funnels. After all the seeds are filled, press the seeds tightly by hand, trim them after the glue is slightly dry, and remove the excess seeds.
Finally, when the glue dries all night, you can spray varnish, preferably a few thin layers. When the paint dries, a wonderful seed sticker will be finished. You can decorate it a little, hang it on the wall, or press it under the glass counter. Do you think it looks good? Try it yourself if it looks good.
What kind of glue is suitable for bean paste? Bean paste is suitable for liquid glue, and it should be sticky. Besides, the white latex paste is very good. First make a composition, then brush the white latex (don't brush too much at a time, you need to paste it slowly step by step), and then put the selected beans on the white latex in turn until the latex dries.