Installation instructions:
1, if a new computer or computer system can't start, you need to use another available computer to make the Chinese cabbage USB flash drive start.
2. Install a 32-bit (x86) system if the running memory is 2G or less, and a 64-bit (x64) system if the memory is 4G or more.
3. If the operating system is larger than 4G and can't fit into the USB flash drive, please refer to the solution that the USB flash drive system can't fit more than 4G images.
Related reading:
Course of uefi loading system for Chinese cabbage
How to install non-ghost system with Chinese cabbage
Method for backup desktop data of C disk by pe when system crash.
I. Preparations
1, ghost system download: tomato garden ghostwin764-bit flagship installation version V20 18.07.
2, 4G and above U disk: How to make U disk startup disk with Chinese cabbage?
Second, U disk startup settings: Chinese cabbage U disk installation system settings U disk startup tutorial (including BIOS settings)
Three, Chinese cabbage ghost installation steps are as follows
1, according to the above tutorial, make a Chinese cabbage U disk boot disk, and then copy the downloaded ghost system iso file directly to the GHO directory of the U disk;
2. Insert the Chinese cabbage boot disk into the usb interface of the computer that needs to be installed. After restarting, keep pressing the shortcut keys such as F 12 or F 1 1 or Esc to open the boot menu, select the USB option and enter, such as GeneralUDisk5.00. For computers that don't support these startup keys, check the second point to set the USB boot method.
3. Enter this interface after booting from the U disk, and select 02 option to enter through the direction key, or press the number key 2 directly to start the pe system. If you can't enter, select 03 old PE system;
4. After entering the pe system, you don't need to re-partition completely, so you can directly execute Step 6. If you need to re-partition, you need to back up all the data, then double-click to open the DG partition tool, right-click the hard disk and select Quick Partition.
5. Set the number and size of partitions. Generally, it is recommended that drive C be above 50G. If it is a solid-state hard disk, check "Align Partitions" to perform 4k alignment, and sector 2048 is enough. Click OK to perform the hard disk partition process.
6. After the hard disk is partitioned, open the one-click installation of Chinese cabbage, and the image path selection system is iso mirrored. At this time, the gho file will be automatically extracted, and click the drop-down box to select the gho file;
7. Then click "Restore Partition" and select the installation location of the system, usually drive C. If the drive letter under pe is not displayed, you can choose according to the "volume label" or disk size, and click OK;
8. At this time, a prompt box pops up, check "Restart after completion" and "Boot repair", and click Yes to execute the ghost installation process;
9. Go to this interface and perform the operation of installing the system to drive C. This process takes about 5 minutes, so just wait patiently.
10. After the operation is completed, the computer will automatically restart. At this time, pull out the U disk startup disk of Chinese cabbage, and then it will automatically restart to enter this interface to perform the process of installing system driver, system configuration and activation.
1 1, and the installation process takes about 5- 10 minutes. Finally, it restarts to enter the new system desktop, and the installation process of Chinese cabbage ghost is completed.
After the above steps, we have completed the ghost installation process of the U disk. Except that it is difficult to set up the U disk to start, the ghost installation in the back is very simple.