The key to driving a good manual car is to shift gears, focusing on the car's driving speed in time to shift gears, and to be fast, accurate, so that you can do to put free.

Generally, the start of the first gear, when driving a few meters and then change the second gear; when the speed of the car reached 20 mph more than 35 mph to change the third gear; the speed of the car reached 35 mph more than 45 mph to change the fourth gear; the speed of the car reached more than 45 mph to change the fifth gear. The above is an ordinary five-speed car, for more than 6-speed car, the speed of every increase of about 15 mph can add a gear. In addition, when shifting gears, you should look at the engine's . RPM, it is best to shift in time at about 2500 RPM.

2, start shifting skills

"Hang a gear, release the handbrake, lightly lift the clutch to the oil," this is the novice in the driving school to learn the shifting skills. But in fact, the correct operation is to start after the gear, before lifting the clutch, the engine pre-supply of oil. Why is the theory of driving school bad? "Lift the clutch slowly refueling", is that when the clutch is in the half-linkage state to start refueling, this time, because the clutch half-linkage, the engine load becomes large, the speed will become low, and slowly step on the gas pedal to improve the engine speed, but the whole car half-linkage state will also become very long, which means that the clutch plate wear This means that the clutch plate will be worn out, and the car will accelerate slower, and the car may stall if the idle speed is low. At this time, before lifting the clutch, the engine is supplied with oil in advance, which can reduce the time of the clutch semi-linkage, reduce the wear of the clutch, and accelerate faster.