A, villa glazed tile roof modeling practice
Glazed tiles are made of high-quality ore raw materials, which are screened and crushed, shaped under high pressure and fired at high temperature. It has the obvious advantages of high strength, good flatness, low water absorption, bending resistance, frost resistance, acid resistance, alkali resistance, never fading and never weathering.
1, construction technology: cleaning the base → leveling with cement mortar → paving glazed tiles → paving ridge tiles → maintenance → inspection and acceptance.
2. Cleaning the base: The surface of the base must be cleaned, especially the sundries in the eaves gutter, downspout and exhaust duct.
3. Cement mortar leveling: apply a coat of1:3 cement mortar, and rub it with a wooden trowel as you apply it.
4, according to the layout of the roof flashing tile, generally from the roof and watershed, and then along the vertical and horizontal two-way pre-row.
5. When laying glazed tiles, the central axis shall be arranged according to the site pay-off positioning from bottom to top and from left to right.
6. The ridge tile should be laid from the bottom of the sloping roof ridge and from the bottom to the top of the sloping roof ridge. The large head tile of the ridge tile should be close to the "safety tips for taking the opportunity". Pay attention to the cornice when traveling safely, and fix the ridge tile with cement mortar mixed with pigments at the other end.
Until the small head ridge tile is laid. The lap length between ridge tiles should meet the requirements, and at the same time avoid cutting to ensure the integrity of laying; Laying of ridge tiles must be done by pulling wires to ensure that the ridge tiles are in a line. The cornice tiles must be fixed with cement mortar and nailed to the edge eaves.
Second, the villa glazed tile characteristics
1, exquisite appearance, not only has the simple and moist taste of traditional bricks, but also looks elegant and unique.
2. Light weight and good hardness. The weight is generally110 of the weight of Weiwei ordinary brick, but it is tougher than ordinary brick and can bear greater pressure.
3. Strong wind resistance, heat resistance, sound absorption and water resistance. It can remain the same in the wind and sun, will not be blown off easily, and will not seep into the house, and can resist some heat in the hot summer days. It will also resist some noisy sounds from the outside and keep the room quiet.
4. Corrosion resistance: 55% of the raw materials of the base plate of the color steel glazed tile are galvanized aluminum, so it can resist chemicals such as acid, alkali and salt in the rain for a long time.
5, convenient installation, energy saving and environmental protection. Compared with ordinary tiles, it is better to operate and construct, greatly shortening the construction time and reducing the construction cost. Because this kind of tile does not contain playing materials, it can be recycled and reused in the later demolition, saving resources.
Glazed tiles have many remarkable characteristics, such as high strength, good flatness, low water absorption, frost resistance, acid resistance, alkali resistance and never fading, and are widely used in many occasions. The above is the modeling practice of glazed tile roof of villa and the characteristics of glazed tile introduced by Xiaobian.