1. On the reverse side of genuine Adidas coconut shoes, the center line is lined up until the top can be checked by hand; The conspicuous sand leakage thick line sewing method has the actual effect similar to manual production, neat and tidy, and the upper and lower shoes should be highly consistent. And many low-end high imitation shoes here can be seen at a glance that the surface layer is slack and uneven, the line is inclined, and the weaving center line and other problems. In addition, the shoelace holes of genuine Adidas coconut shoes are not large, and the holes are not visible after tying the shoelaces, which are generally tight, while the holes of some high imitation shoes are very large, which makes them feel a little loose after tying the shoelaces.
2. On the side of Adidas coconut shoes, it can be found that the lines on the side of the shoes go inward, and the heels should be pulled up to construct a dynamic and forward-extending fitness wireframe, while many common high imitation shoes are flat and lack a sense of movement.
3. The heel position of genuine Adidas coconut shoes. Note: the distance between the square fixed part of the ribbon and the shoe welt should be 1 cm, and it is wrong to be too big or too small; There should be five little red dot on the square suture on both sides of the ribbon, and the square border in the middle of the ribbon needs nine little red dot; The visual angle of the stitching on both sides of the webbing is parallel to the tread of the heel.
4. Main points of genuine Adidas coconut shoe uppers. Note: the shape of the boost buffer layer in the middle of the heel is not smooth, and there must be seven star groups as shown by the red circle in the figure. This part of the high imitation shoes will lack matching particles, even the surface is bright and clean, and it has the feeling of cheap plastic.