Structural Principle of Corn Peeling Machine

The machine is mainly composed of frame, feeding hopper, roller and outlet. The raw material enters into the drum chamber through the feeding port, and the corn skin is dislodged by the drum body through rotation, friction, extrusion and propulsion, and the corn skin and the corn cob are automatically discharged from their respective outlets.

The motor is mounted on the power seat, the main shaft is mounted on the bearing seat, the main shaft is connected to the motor by a belt, the main shaft is provided with spiral strips and rubber pegs, the main shaft is fitted with the transmission shaft by gears, and a plurality of rubber wheels with protrusions are set on the transmission shaft.

The bearing seats at both ends of the main shaft are not on the same level. As the active shaft is provided with spiral strips and rubber spikes, the drive shaft is equipped with a plurality of rubber wheels, the active shaft and the drive shaft are compatible with each other, and the peeling device is able to uniformly take the cobs which have entered the machine.

Allocated to the two pairs of relative rotation between the peeling shaft, and in the case of the cob's own rotation, smooth forward, in the process, by the special peeling claw tearing bracts, and in an instant by the rotating shaft rolled bracts pulled down, and complete the peeling of the purpose.

Expanded information:

Maize peeling machine maintenance after operation:

1, After the shift operation to check the parts of the bolt fastening, and maintenance of the machine. A comprehensive inspection should be carried out after the completion of each season's operation, and if there is damage or serious wear and tear of the machine parts, they should be repaired or replaced in time to ensure that they are used in the next threshing season.

2, maintenance and repair of the machine, should be cleaned up inside and outside, placed in a dry, ventilated room. The machine should not be placed directly on the ground to avoid moisture. If the paint is peeling off, it should be brushed, and the unpainted parts should be coated with anti-rust oil.

3. Regularly fill the bearings with lubricating oil, generally 10 days after the first use of a new machine, and then once every month. Bearing replacement should be carried out by professional maintenance personnel, so as not to affect the assembly quality of the machine.

Baidu Encyclopedia - Corn peeling machine