The simplest way to tie a belt bow is illustrated below:

1. The simplest way to tie a bow

1. First cross the belt together.

2. Insert the outer strap to the inside of the inner strap.

3. Put the tape up from the left side of the other tape to form a triangular hole as shown in Figure 3.

4. Fold the strap in half, dig it into the hole, and tighten it.

5. A simple side-tied bow is enough. This tying method is simpler than the traditional bow, and it is dignified and elegant.

2. Traditional bow knot tying

1. Fold the two main points together in half.

2. Take the left belt under the right belt.

3. Fold the right belt inward and set aside.

4. Fold the left belt in half as a spare.

5. Pass the folded belt on the right side through the folded belt on the left side.

6. Tighten the folded waistband, arrange it a little, and the perfect bow will be tied.

3. Single ligation method

1. Tie the two belts crosswise

2. Take the right belt under the left belt.

3. Tighten and tidy up, and a simple single-knot bow tie is completed.

4. Buckle-style tying method

1. Cross the belt up and down, with the side with the buckle slightly shorter and placed underneath.

2. The upper belt is wrapped around the shorter belt, then looped out from the inside, and the first knot is tied.

3. Pull the upper belt down, tie a knot around the lower belt, and pull out the upper belt.