Disassembly steps and methods: the first step, the pot empty, dry water, disconnect the power supply to ensure that the rice cooker stops operating to avoid possible electric shock. The second step, open the lid, rotate the screws of the inner cover, the sealing ring and aluminum plate inside the lid, remove it, and then use a needle to pick out the screws inside, remove the rubber plug on both sides. Step 3, twist off the two internal screws, remove the handle, and then use a variable pry bar to pry both sides of the lid, the upper lid handle pry open. The fourth step, you can see pry open the handle on the inside of the cover has a very screws, in turn, twist off, and then pry open the upper panel, you can remove the menu computer board.

If it is an electric pressure cooker, you need to lift the qualifying valve upward to lift the time, and then rotate counterclockwise, and then remove the qualifying valve, rotate counterclockwise to cover the middle of the golden screws twisted down the inner cover on the dismantling, in turn, to remove the corresponding parts, the inner cover will be dismantled after the removal of the panel.

Warm tips, in the removal of the panel, do not force the removal, you can prepare a hairdryer, blowing the corners of the panel with a hairdryer for about 5 minutes, until the panel's corners of the parts warped, you can remove the panel, which protects the integrity of the panel, but does not affect the secondary installation.

Every day to deal with the rice cooker, if you can skillfully grasp the knowledge of the rice cooker, very convenient life, but there are problems or the first time to contact the after-sales service, do not arbitrarily disassemble.