First, the conveyor belt occupies water and is prone to deviation. In the process of using the conveyor belt, it is necessary to avoid contact between the conveyor belt and water as much as possible, and try not to let the conveyor belt work in the open air to avoid damaging the conveyor belt in rainy days. Don't put water where there is a conveyor belt to prevent water from being accidentally spilled on the conveyor belt.
Second, because the conveyor belt is too long and too big, it can cooperate with the drum, and it is easy to slip and run off when working. How to prevent such slippage and deviation? You can do some special positioning treatment when the conveyor belt and the roller cooperate, such as machining on the conveyor belt and making a guide bar for guiding and positioning. Of course, there should also be a groove, which just matches the guide rod of the conveyor belt to guide and fix the conveyor belt, so that the conveyor belt will not slip left and right.
Thirdly, the reason for the deviation and slippage of the conveyor belt is that it was not installed during the installation process and the drum was not debugged well. Therefore, when installing the machine, debug the conveyor belt and the drum to make them just match.
Fourth, if the conveyor belt is used for a long time, the rollers will loosen, and if it is used for a long time, the conveyor belt may slip and run off because of the longer tension. In order to prevent this kind of slippage and deviation, we need to check and maintain the machine in time, and adjust it in time if it is loose. The position of the roller can be adjusted, and our loose conveyor belt can be tightened. (From Qingchuan, official website)