1. Before using the water dispenser, be sure to pay attention to its placement. Many families will choose to put the water dispenser in the kitchen. If the kitchen floor is a small-sized tile, we should pay attention to whether the water dispenser can be placed on the floor smoothly to prevent cracks in the tile from causing uneven base. If necessary, a cushion can be used to assist leveling. If the water dispenser is a product with heating and cooling functions, then pay attention to the distance between the back plate of the water dispenser and the wall. Generally, the distance from 5 to 10 cm is appropriate, which is beneficial to the heat dissipation of internal devices.

2. After the water dispenser is placed, in order to prolong its service life, everyone should also pay attention to the correct use steps of the water dispenser. Every time you change the bucket, you need to remove the label and plastic top cover above the bucket cover, and then turn the bucket upside down above the water dispenser. In this way, the water distributor of the water dispenser can automatically open the soft cover of the bucket and introduce water into the water dispenser. If it is the first time to use or not for a long time, you need to turn on the heating and cooling faucet first, and then turn on the power supply of the water dispenser after the water flows out stably. Every time it is used, if the indicator light above the heating faucet changes from red to yellow, it means that the heating is complete.

3. When using the drinking fountain, you can't ignore the cleaning work. In addition to regularly wiping the dust on the water dispenser shell with a wet rag, it is also necessary to regularly clean the inside of the water dispenser. Although the water used in the drinking fountain is clean, with the increase of use time, some bacteria may breed in it. When cleaning, take down the empty bucket above, then open the faucet and the drain of the machine, and then empty the water inside. After that, the food-grade disinfection water is diluted, and then it is injected into the water dispenser with the faucet and the drain closed from above, and it is allowed to stand for 20 minutes, and then the diluted disinfection water is discharged. Then clean it with pure water three or four times in this way.