Current location - Recipe Complete Network - Pregnant women's recipes - What should I do if the indicator light of domestic ice maker fails?
What should I do if the indicator light of domestic ice maker fails?
To put it bluntly, an ice maker is a machine that makes ice cubes. When people buy drinks, they often say to add ice or remove ice. Ice cubes are made by ice machines. However, during the operation of the ice maker, many minor problems often occur, such as the failure of the indicator light. The following small series will briefly talk about how to do if the indicator light of the household ice maker fails, hoping to help everyone.

What should I do if the indicator light of domestic ice maker fails?

First of all, the power indicator has been flashing rapidly and the machine is not working.

One of the possible faults is that the probe for detecting water temperature is broken. Open the back cover first, open the cover of the electric control box above the compressor, find a three-core connector, check whether there is any phenomenon of separation or poor contact, and then plug it in again.

2. The machine does not work when the three indicator lights are flashing circularly.

Abnormal ice-making and deicing of the machine is also the cause of this kind of failure. First cut off the power supply and restart the machine. Check whether the fan and water pump are working normally. If there is any abnormality, remove it first, and then check whether the compressor has started working. If it doesn't work, check the parts near the compressor. If it is started, judge the failure of the refrigeration system and press the corresponding maintenance method.

Third, the ice-filled lamp flashes quickly.

This fault indicates that the deicing time exceeds the specified time, and the machine automatically protects. Generally speaking, you can restart the machine. If it appears repeatedly, check whether the roller skating version swings up and down flexibly. If the two-way solenoid valve is damaged, this phenomenon will also occur, and the machine can be cooled. But when the ice reaches the set thickness and enters the deicing state, the water pump will stop working and the ice will not fall off. During the inspection, the ice will be forcibly deiced (press and hold the select key for 3 seconds). If there is no obvious airflow sound in the ice maker, it can be considered that the two-way solenoid valve is broken, and you can check whether the power supply of the solenoid valve is normal. You can also change the coil for debugging, and the valve body itself rarely cannot be opened.