First, how to color photos in winter?
Most of the pictures in winter are cold, and the cold pictures look simple, but it is quite complicated to deal with others. First of all, we need to beautify the local part of the picture and repair its shortcomings. Then the overall touch-up, the tone should not be too stiff, with softness and fantasy as the best. Finally, we need to decorate some winter elements, such as snowflakes. Examples of using PS are as follows:
Open the original material and analyze the parts of the picture that need beautification: the skin part of the character is not clean enough, the exposure is not enough, the color is slightly dull, and the atmosphere is not enough.
1. First, grind the skin and repair lighting effects simply.
2. Use the lasso tool to select the highlighted part of the table, and use the color balance adjustment layer to adjust it to a unified color.
3. In the same way, adjust the color temperature of the left hand with color balance to create an effect that is basically unified with facial skin color.
4. After local adjustment, adjust the color as a whole to create a color balance adjustment layer. The parameter settings are shown below.
5. Create a curve adjustment layer and brighten it as a whole.
6. Use the clothes in the selection area to adjust the color scale after proper feathering. The parameter settings are shown below.
7. Use the lasso selection to select the face of the person, and use the curve to brighten it after feathering, as shown below.
8. Create a solid color adjustment layer with the color set to ffcc00. After confirmation, change the layer blending mode to "positive overlay", and the effect is as shown below.
9. Create a solid color adjustment layer with the color set to #492 13d. After confirmation, change the blending mode to "color filtering", and the effect is shown below.
10, create a color balance adjustment layer, and set the parameters as shown below.
1 1, create an excellent adjustment layer, and set the color to dark blue: # 1d 1c50. After confirmation, change the layer blending mode to "Exclude" and the opacity to: 15%. The effect is shown below.
12. Create a color balance adjustment layer and adjust the midtones, shadows and highlights. The parameter settings are shown below.
13. Create an optional color adjustment layer and adjust the black color. The parameter settings are shown below.
14, create a curve adjustment layer, and set the parameters as shown below.
15, and finally add words and other decorations to complete the final effect.
In winter, I use the color matching Lr filter APP for the photos of the mobile phone version. The specific operation is as follows:
Color matching ideas:
Autumn and winter are orange, but otherwise it's bleak, so we just need to keep orange, red and yellow move closer to orange, and other colors reduce saturation. The original picture is as follows:
Image import LR mobile app
The following are the parameters of the model color matching:
Brightness and color mixing (see the figure below)
Exposure+1.09
Contrast 0
Highlight -24
Shadow +59
White scale -38
Black scale +0
Color (see below)
Color temperature -20
Hue -3
Natural saturation 0
Saturation 0
Effect (see the figure below)
Texture 0
Clarity+18
Go hazy +28
Halo 0
Second, how can a mobile phone repair a blockbuster without ps?
There is no PS on the mobile phone, so how can you repair a blockbuster with your mobile phone? Examples are as follows:
The mobile phone retouching software used is snapseed. After opening the photo with snapseed, click Tools. In the tools, select a brush. Please see the position marked by the red arrow in the figure below.
Enter the brush tool, click the brush on the left at the bottom of the page, and there will be four brushes, namely, light increase and light decrease, exposure, color temperature and saturation. On the right side of the blue brush on the left, there are two arrows up and down, with a number in the middle, the downward arrow is to decrease this value, and the upward arrow is to increase this value, which represents the shade of the brush. A positive number is to increase this parameter, and a negative number is to decrease this parameter. Between the positive number and the negative number, there will be an eraser. If you smear something wrong with a brush on a photo, you can change this parameter to an eraser and then erase it.
First, we choose the brush of adding light and reducing light, and set the value to positive 5 to smear the yellow tree area in the middle of the photo, because it is necessary to show the contrast between light and dark in the photo, so that there will be more tension in the picture. But when smearing, don't smear it on the water or the sky. You need two fingers to put it on the photo and stretch it in two different directions. After enlarging the photo, smear it again.
Then choose the color temperature brush and set the value to plus 5. Look at the picture below, and smear the yellow leaves in the photo. The purpose is to make the picture look cold and warm, because the sky is gray and gloomy, and the water surface will also make people feel cold, so let the yellow leaves and yellow trees here look warmer, and the photos will have a cold and warm contrast, which will make them more attractive. Then, the brush with color temperature is turned into a negative number, and the sky is smeared, so that the original hazy sky becomes a faint blue color. The purpose is also to increase the contrast between cold and warm photos and make cold places look colder.
After learning this tool, don't forget the previous tool. After the above adjustment, click the checkmark, save the modified steps, then click the tool, select the highlighted details, and see the following figure.
When you slide your finger up and down, two parameters, structure and sharpening, appear. Select the structure, slide to the right, and increase the structure, as appropriate. Don't adjust this value too high. After the structure is increased, you will see the texture on the screen, which will become stronger. Why increase the structure? Because in the foreground of this photo, there is a very obvious root, and the texture on the root is very clear. It is necessary to strengthen this clarity and make the picture look more textured.
Finally, adjust the overall tone of the photo, click Tools, select Adjust Picture, and slide your finger up and down to show the picture below. Select the atmosphere, and slide to the right to increase the atmosphere, so as to make the tone of the photo look better overall.
Finally, I got a big movie:
Personal experience: It is still necessary to try, practice, observe and learn more in the later stage of photography, and find the color matching method that you like and suit yourself. You can refer to some excellent photographic works to see how they color, sum up and practice more, and make your own blockbusters.