One, how to use the soybean milk machine
1. Wash and soak the soybeans in water.
2. Pour the soaked beans and water into the soybean milk machine.
3. According to the amount of beans, add a certain proportion of water, water can be added more, or too much dregs, soybean milk is rare. However, it should be controlled within a certain range, not below the minimum water level, above the maximum water level, or the machine is prone to failure.
4. Cover the nose of the soymilk machine to make sure it is in place.
5. Plug in the power supply, the indicator light is on, according to the function of the machine panel to select the button, for example, black rice, peanuts can be pressed cereal soybean milk press, after the selection, the soybean milk machine will start.
6. Wait until the machine sounds an alarm, which means that the soybean milk is good, you can unplug the power.
Two, soybean milk machine buying tips
1. brand
Believe in the power of brand, so the first point is to look at the brand. The brand is not only an identification mark, it also carries the consumer's recognition of products and services, and choose professional brands and big brands to ensure better quality. The big brands of soymilk machines in the market have been rigorously tested in terms of material quality and functionality, and the products sell well, which is more conducive to obtaining a real evaluation.
2. Noise
Don't look at the soybean milk machine is not big, the noise is not small, buy soybean milk machine noise problem can not be ignored. We usually use soybean milk in the morning or at night, and too much noise will affect other families. Therefore, before choosing a soymilk maker, you must first understand the noise level of the product and if you can operate it better in the field.
3. Blade
The blade of a soybean milk machine must be properly designed, because it has little effect on the degree of crushing of beans and the speed of making milk. So how to design a good soymilk blade? The blade needs to have some spiral angle. When the blade rotates, it will form a three-dimensional space in which the beans will be crushed. This will not only improve the pulverization rate of beans, but also better polish the nutrition of beans.
4. Seal
Besides that, soymilk has certain requirements for sealing performance. How to check the sealing performance of soy milk? You can put the soymilk machine on a flat table, turn on the power and idle for about 1 minute, then add the right amount of water then turn it for 1 minute, observe if the machine has a large discharge, if there is any smell or leakage, if not this means the seal is good.
5. Live
If you are there, don't miss the guided demonstration. Soymilk maker is no longer the original appearance, not only can make soy milk, but also can make rice pudding, etc., more and more functions. Watching the live operation of the shopping guide not only allows you to learn how to use the new functions, but also gives you a more realistic idea of how the soy milk maker performs. Some people can also experience it live, an even rarer opportunity.
Three, the use of soybean milk machine notes:
1. Do not let water into the head.
2. Do not cut off the power supply before removing it or putting it into the head.
3. When cooking soymilk, keep the machine out of reach of children.
4. When frying soymilk, soybeans must be added to the cup first, then water should be added, and the water level should be controlled between the upper and lower water lines.
5. Rafael network should be cleaned in time.
6. The electric heater and temperature sensor should be cleaned in time.
7. Please pay attention to the correct method when removing the Rafael network to avoid injury.
8. When the machine is crushed, it flashes and slows down intermittently and cannot be touched.
9. When the machine is working, keep a certain distance from the socket.
10.Do not pull or plug in the power cord when the machine is finished.
The above is brought to you by us about how to use the soybean milk machine.