Summary: When we are baking at home, many varieties of pastry production should be based on eggs as raw materials, and must use the egg beater as a tool. Compared with the manual whisk, the electric whisk is more convenient and easy to use. But because the electric whisk is commonly used electrical appliances, there will inevitably be some common faults, such as flour and noodles, flour stirred into the machine failure; plugged into the power cord, press the key, the machine does not work and so on, then how to repair the electric whisk is bad? The following for you to share the electric whisk repair and maintenance methods. First, the electric whisk repair and maintenance methods

and flour stirred into the machine failure causes:

1, the two powder stick installed reverse;

2, whether the ingredients are too much.

Treatment:

1, the right adjustment of the powder stick;

2, cut off the power supply, remove the excess ingredients.

Plug in the power cord, press the on/off key, the machine does not work Failure causes:

1, whether the power outage;

2, whether the power cord plug is plugged;

3, whether the power socket is off;

4, motor damage.

Treatment:

1, check and exclude;

2, check and exclude;

3, check and exclude;

4, send for repair.

Mechanical part of the failure of the most important is not impact and impact powerlessness, not the main reason for the impact of the piston and the hammer on the aging of the rubber ring, will be the big cylinder upright, mouth down, such as the hammer can fall freely, that the rubber ring must be aging, the impact of the seed is short can also be caused by non-impact (and can be compared with the new impact of the seed). If the above conditions are normal and no impact, it must be a good look at the cylinder to see if there are cracks, cracks need to be replaced.

Two, the maintenance of the whisk

1, every day after the use of the mixer must be cleaned: the mixing ball, mixing fan, mixing cylinder removed and cleaned, in the cleaning of the application of water rinse, do not wrestle the mixer.

2, every week to clean the whole machine, the application of wet towels to wipe the equipment, not water to rinse the equipment, to prevent water from entering the electrical appliances or bearings inside, resulting in equipment damage.

3, every month the sliding parts inside the machine with lubricating oil, and in the gear box with wear-resistant gear oil.

4, check the belt tightness, to prevent the belt from slipping, damage to the belt.

Three, the use of the whisk notes

1, there must be a protective grounding;

2, keep the machine working smoothly, not the whole machine in the shaking under the work;

3, can not be rinsed with water to rinse the equipment;

4, can not be overmixed;

5, such as fan mixing filling, please use the fan mixing below the 5-speed work.