1, choose a place with sufficient water, introduce seed frogs after cleaning and sterilizing the ponds, and do a good job of hatching, feed them reasonably during the growth period, and control the water quality and do a good job of preventing diseases and other measures.
2. Selection of site, the frog breeding site should be selected in a place with high terrain, sufficient water supply and no pollution. Make sure that the water source is sufficient, the water change is convenient, the water does not contain ammonia nitrogen, nitrite, heavy metals and other toxic and harmful substances, and the ph value of the water source and the pond water should be 6.5-8.5.
3. Pond clearing, if it is an old pond, you should remove the dirt at the bottom of the pond, and then use quicklime (150-200 pounds/mu) or bleaching powder (60 pounds/mu) to clear the pond. If it is a new pond, directly use the above method to clear the pond. Then test whether the ph value is normal. ph value is low, you can splash lime to adjust the ph value; ph value is high, change the water a few times until the ph value is normal.
4, detoxification, after the ph value is normal, the whole pool is sprinkled with Paradox (5-8mu/bottle)
5, water intake, water intake, pay special attention to put a dense net at the water intake, to prevent the larvae of the enemy organisms from entering into the breeding pool.
6. Breeding frogs, the selection of breeding frogs should be healthy, large individuals, good quality parents, do not choose breeding frogs in the pool of the disease. The spawning pool should be disinfected regularly, once a week with Xianglian solution (1ppm). The water of the spawning pool should be kept clean to avoid mud, moss, etc., which will lead to the death of fertilized eggs due to lack of oxygen.
7, incubation, hatchery pool should be built in a place with high terrain, sufficient water and no pollution. The water does not contain ammonia nitrogen, nitrite, heavy metals and other toxic and harmful substances, and the ph value of the pool water should be between 6.5-8.5 for good. The hatching pool should be disinfected regularly by splashing the whole pool with Xianglian solution (1ppm) or Good Easy Clean (1ppm) once a day. The water in the hatchery pool should maintain a certain degree of mobility to ensure that there is sufficient dissolved oxygen in the water. Fertilized eggs should be placed as widely as possible in the pool to avoid death of fertilized eggs due to lack of oxygen. In case of bad weather, the pool can be cast when the lack of oxygen sprinkled particles of oxygen.
8, four, tadpole breeding, fertilization, before putting tadpoles should be fertilized. Fertilizing water can be used with Paradox (5mu/bottle) + fertilizer. Regularly adjusting the water Paradox + Multi-Harmony or Benjamin, alternately, every 7-10 days to use. Mixing internal health care kg of feed mixing astragalin 0.5 g + fruit rootin 2.5 ml + polyhexin 5 ml + multivitamin 5 g, once every half a month, each time continuous feeding for 5 days. Regular disinfection: Splash Xianglian solution (1ppm) in the whole pool every 5-7 days. Anti-stress: use stress hormone (0.2ppm) before and after the weather change to splash the whole pool
9, adult frog breeding, regular disinfection: spray the whole pool with Xianglian solution (1ppm) every 7-10 days. Regular mixing and feeding: mix 0.5g of astragalin+2.5g of fructansin+5g of multivitamin+5ml per kilogram of feed, once every half a month, each time for 5 days. Reasonable feeding feed: the feed should be eaten in 40-60 minutes, it is better to eat a small amount of times, otherwise gastrointestinal diseases are likely to occur. High-temperature heat prevention and anti-stress. When the temperature is above 37 degrees, mix 2.5 grams of hormone per kilogram of feed and feed it once a day. Diligent water change: When the water quality deteriorates, change the pool water in time to avoid the harm of harmful substances on the frog.