Precautions for using the electric butter pump are as follows:

1. Before installation, please confirm whether the power wiring is correct and whether the input voltage is correct. Connect the power according to the correct voltage label. Please check and ensure the integrity of the device.

2. Please refill the correct oil specified by the system, and use new oil. Do not use oil that has been used or has impurities, and keep the oil clean and free of impurities.

3. Frequently check the oil barrel level of the oil pump to avoid idling. If there is no oil or less oil, add grease in time.

4. The electric butter pump should be installed in a place with suitable ambient temperature, low dust, small vibration, easy adjustment, inspection, maintenance and grease replenishment, and should be arranged in the center of the system as much as possible to shorten the time required. The length of the system piping keeps the pressure drop low so that the pump can generate enough pressure to overcome the resistance of the lubrication point.

5. When adding oil, please use a grease gun to fill the oil from the oil filling port into the oil cup until the oil suppression block is at the highest oil level of the oil cup. Pay attention to draining the air, and do not refuel from above the oil cup to avoid air entering the oil cup, causing the oil pump to run dry and no oil to be discharged.

6. Pay attention to regular maintenance and keep the outside of the butter pump clean. The best maintenance is to use clean oil without impurities.

7. When the electric butter pump fails, do not operate or disassemble it at will. Please consult our factory's technical personnel. If you find any abnormal response, stop it immediately to avoid greater damage.