Build a pond for loach breeding: If you want to raise loach, you must first build a pond for loach. You can use cement to pave it to a depth of about two meters, and then determine the area of the breeding pond according to the scale you want to breed. Then spread about 20 cm of soil on the concrete floor. Only when there is soil in the pond can the loach survive and grow normally. Moreover, there should be pipes for water injection and drainage in the pond. When cultivating loach, the water inlet should be designed above the pond. Then put a plastic pipe about five centimeters above it, and put some nets to prevent loach from entering the drainage pipe to prevent loach from entering the drainage pipe.

Preparation before planting seedlings: After the pond is built, all the inside of the pond should be disinfected first. The specific disinfection method is to put quicklime and water into the pond evenly. Generally, about 50 centimeters of tap water should be put into the pond, and then 30 kilograms of lime should be added. After disinfection, the whole pond is drained uniformly. About a week later, some organic fertilizers can be placed, and organic fertilizers can have some small microorganisms after being exposed to the sun for about two days and two nights. At this time, water can be stored in the pond, and some aquatic plants or summer grass suitable for loach to keep out the sun should be put in the pond. Loach seedlings can be released after three days of storage.

When storing water, you should soak the bought loach seedlings in salt water for about five or six minutes. If you can be in salt water, there is nothing unusual. Then such loach seedlings can be put into the prepared pond for breeding. On the other hand, once the loach appears some abnormal behaviors in the salt water, such as abnormal activity and abnormal immobility, and even some loaches will die, we must pick out such loaches.

Scientific breeding of loach: In order to make loach grow faster, we must avoid putting too many loaches in the pond. When loach is just released, it is generally raised at a density of about 0.3 kg per square meter. If the culture density is too high, it will easily affect the normal growth of loach. Moreover, it is easy for loach to infect some diseases. If you want loach to grow faster. We must scientifically raise loaches according to the correct feeding methods, and don't think that the more loaches we raise, the higher the yield.

Misgurnus anguillicaudatus eats a variety of foods. When Misgurnus anguillicaudatus is young, it can be allowed to eat some algae in some water. As you grow up slowly, you can artificially feed some bait when the loach grows up to 5 cm. Generally, when feeding loach, you can feed some animal viscera, fresh vegetable powder and some miscellaneous grains. Even some fish powder can be eaten by loach. Moreover, when feeding the loach, it is best to fix it at regular intervals. Generally, it is fed once every morning and once at night.

Suitable temperature for loach: Loach prefers to live in warmer places. Generally, Loach can live in water from 10℃ to 30℃, and the water temperature in summer is suitable for normal life of Loach. And in summer, the temperature is generally above 20℃. At this time, the loach grows faster. If you want the loach to grow faster, you must give the loach enough feed at this time. But if the temperature is high, it will also affect the normal life of loach. Generally, in winter, when the water temperature is below zero or below five degrees, sometimes loach will stop growing.

Therefore, in order to make loach grow all year round, some new water can be added to the water in summer, so that the water temperature can drop to about 20℃. In winter, when the weather is low, some heating methods can be used to raise the temperature. Generally, it is best to keep the temperature of the place where loach grows at 15℃ to 20℃ all the year round. In order to cultivate loach reasonably, we must master the suitable temperature of loach.