Glass bottle lids can not be opened solutions are as follows: use a towel or wear gloves, use plastic wrap or rubber bands, bottle mouth down to tap the bottom of the bottle, use a knife to pry the cap, soak in hot water or hair dryer heating.

1, use a towel or wear gloves. By increasing the friction approach, to change the nature of the two contact surfaces, the towel over the bottle cap, the towel can help you in grasping the bottle cap more firmly, and then use your usual hand to twist. You can also wear the rubber gloves that you usually use when washing dishes or doing cleaning, so you don't wet your gloves or increase the friction when twisting the bottle cap.

2, with plastic wrap or rubber bands. With the help of some props to make the surface of the bottle cap rough, cover the bottle cap with plastic wrap, plastic wrap should be close to the bottle cap and the cap of the bottle around, cover the tighter the better, and then screw the bottle cap. If you don't have plastic wrap, you can also find a rubber band that is smaller than the diameter of the bottle cap, and then put it on the bottle cap to try to unscrew the cap.

3. Tap the bottom of the bottle with the mouth facing down. The mouth of the bottle diagonally downward, the hand beat the bottom of the bottle, when you hear the "ping" sound, that has been unsealed. Hand beat force is not enough, you can take a wooden spoon, a little heavier effect is better, use it to beat the edge of the bottle cap a few times, once can not be knocked more than a few times to make the bottle cap become loose. If you don't have a spoon, other kitchen utensils will do, anything heavy will do.

4. Pry the bottle cap with a knife. Use the tip of a flat metal utensil to carefully pry the cap away from the bottle, so that it can be unsealed after one turn, but the edge of the cap will be a little deformed, and you may cut yourself if you're not careful.

5. Soak it in hot water or heat it with a hair dryer. Utilizing the principle of thermal expansion and contraction, soak the cap in hot water for 30 seconds or use a hair dryer to heat the cap. Turn up the temperature of the hair dryer and blow it against the bottle cap for 30 seconds to open the cap, but don't use the hair dryer if it's a plastic bottle cap because it may melt.