Common sense of safe use of gas:

1. Why can't a room equipped with gas equipment be used as a bedroom and lounge?

a room or kitchen equipped with gas equipment and facilities such as gas meters, gas stoves and gas pipes should never be used as a bedroom and lounge, because if the gas meters, gas stoves and gas pipes are damaged and leak, it is not easy to detect, which is more likely to lead to explosion, fire and other dangers.

second, why is it dangerous to use gas unattended?

when using gas, you should not leave, always pay attention to the combustion situation and adjust the flame. Because the soup overflows, it may put out the flame, or when a small fire is used, the flame is blown out by the wind and the gas continues to come out, causing accidents such as explosions and fires.

third, how to do a good job of safety inspection when stopping using?

when you stop using gas or before going to bed, you should check the switch of the gas stove to see if it is all closed, and only the gas valves should be closed.

fourth, what should I do if I find air leakage?

if you find the smell of gas indoors, you should immediately open the doors and windows, and check whether the gas stove switch is turned off. if it is turned off, there may be air leakage in the gas pipe or gas meter, you should immediately turn off the main valve in front of the gas meter, and then call the gas company outside to send personnel to check. Gas users should turn off the main switch in front of the gas meter to ensure safety when no one is at home.

5. What safety prohibitions should be paid attention to when finding air leakage?

if the gas branch pipe leaks and the user can't cut off the gas supply himself, he should immediately notify the gas company. Before the maintenance personnel arrive, users must not stay indoors, and strictly prohibit all kinds of kindling from entering, and do not turn on or off the lights to avoid poisoning, explosion and other accidents.

VI. How to identify gas leakage?

fuel gas is an invisible and colorless gas, which is invisible to the naked eye. However, the gas used by users must be artificially odorized, which is a special odor and easy to be smelled by people. If you smell this kind of odor, you should pay attention to whether the gas leaks. When looking for gas leakage, soapy water can be used to smear the joint of gas meter, stove and pipeline. Any foaming place is the gas leakage, but open flame cannot be used for inspection.

VII. What are the hazards of stacking things near gas meters?

Don't pile up inflammable articles such as waste paper, plastic products, dry wood, gasoline, bamboo baskets and other sundries around gas meters, gas stoves, water heaters, etc., so as to prevent the unlit match stems from being thrown into the gas to cause fire accidents and hinder maintenance.

VIII. How to adjust the flame?

when cooking food in a pot or boiling water in a kettle, the flame should be adjusted at any time according to the size of the pot bottom area and the need of firepower, and the flame should not exceed the area of the pot bottom and the pot bottom. The electric cooker should adjust the wind blade between the burner and the cooker body, and the flame is blue, bright and powerful. Avoid wasting gas source when the fire is too big and weak, and forming "bubbling" tempering when the air intake is not enough when the fire is too small.

9. Is it a waste to burn gas in the air?

when using gas, turn it off when you use it well, use it more carefully, don't let it burn empty, and don't waste it for fear of trouble.

11. what should I do if the flame is blown by the wind?

when the flame is blown by the wind, it will fall to one side or swing, and the heat will spread, which will affect the combustion. It is best to make a windshield with iron sheet according to the size of the kitchen eye, or use a worn washbasin to remove the bottom of the pot and cover it outside the foot of the pot. This will not only prevent the wind drummer from extinguishing the flame, but also make the flame burn intensively, make full use of it and save gas.

Xi. How to use the gas stove switch?

turn on the gas source switch, push it away by hand, turn it 91 counterclockwise, and when you hear the beep sound, the burner should be burning (if you don't listen, you should return to the original position and repeat), and then you can let go of your hand. At this time, the burner's firepower is lowered by 91 to be the minimum flame, and it can be adjusted upward to cut off the gas source.

XII. Function and usage of the gas meter switch

The gas meter switch is the opening door when overhauling the cooker, so it should be opened in the morning and closed at night, and it should be used frequently to avoid rust and death, so as to prevent it from being difficult to work in case of accidents. The use method is to turn on the gas when the switch handle is parallel to the gas pipe, and turn off the gas when the switch handle is perpendicular to the gas pipe.

XIII. Maintenance of the gas stove

1. Always clean and remove the stains on the gas stove surface to prevent rust.

2. The burner flame hole is easily blocked by rice juice dust, which can often be dredged by iron wire or old toothbrush.

3. The air inlet of the burner may sometimes be blocked by various sundries, so it can be taken down and emptied with a thick iron wire bucket. General repair of gas stoves

4. How to take the "burner": first open the pot foot, and then lift the burner slightly to take it out.

5. How to deal with "tight switch": Take off the stove panel, tap it gently at the top of the switch with the panel or a small hammer, and add a little lubrication to loosen it.

XIV. Treatment of gas pipeline during interior decoration

1. When gas pipeline is encountered during interior decoration, it should be applied for approval before it can be moved and modified.

2. The gas pipeline is an easy-to-corrode and easy-to-leak pipe fitting. At present, many users bury the pipeline in the wall (ground) when decorating, which is not easy to check and does great harm to normal maintenance. Therefore, users are required to expose gas management indoors when decorating, so as to deal with corrosion and leakage in time and ensure safe use of gas.

XV. Other Precautions

1. Children should always be educated not to play with the valves, hoses and other gas facilities of gas stoves, so as not to twist the valves or forget to close the surfaces, causing gas leakage accidents. It is also necessary to educate children not to hang on the exposed gas pipe to avoid air leakage due to loose pipe joints.

2. It is forbidden to bake clothes, bed sheets, children's diapers, etc. with empty burning gas to avoid fire when clothes are baked.

3. Gas stoves, water heaters and other gas appliances are not allowed to be used indoors with doors and windows closed, nor can they be used in an environment with no ventilation.

4. No articles shall be hung on gas facilities such as gas pipes and gas meters, and no rope shall be used to stay, so as to avoid leakage caused by loose pipe joints. Special attention must be paid to the fact that gas pipelines are not allowed to be used as grounding wires for electrical equipment, and welding on gas pipelines is prohibited to avoid accidents.

5. after the installation of gas facilities is completed, the gas company shall be responsible for the ignition trial, and it is forbidden to try it without permission.

6. Users are not allowed to extend the gas hose without authorization. Household hose should not exceed 2 meters, and both ends of the hose should be locked with pipe clips. Users are not allowed to add or lengthen the hose without permission, because the increase of hose will increase the possibility of damage and air leakage. The aging gas hose should be replaced in time.