Orthogonal paper: 787×1092mm
Number of openings (positive degree) Size unit (mm)
Fully open 78 1× 1086
2 Quarts 530×760
362×78 1
4 quarto 390×543
6 quarts 362×390
8 kai271× 390
16 195×27 1
Note: finished product size = paper size-trimming size
Large format paper: 850 * 1 168mm.
Number of openings (positive degree) Size unit (mm)
Fully open 844× 1 162
2 for 58 1×844 3 for 387×844.
4 quarto 422×58 1 6 quarto 387×422
8 quarts 290×422
Note: finished product size = paper size-trimming size
Common format size (unit: mm)
Format size: 787 x 1092
Opposite: 736 x 520
4 open: 520 x 368
8 open: 368 x 260
Opening hours: 260 x 184
32 on: 184 x 130
Format size (mass): 850 x 1 168.
Opposite: 570 x 840
4 open: 420 x 570
8 open: 285 x 420
16 Opening hours: 2 10 x 285
32 open: 203 x 140
Orthogonal paper: 787×1092mm
Number of openings (positive degree) Size unit (mm)
Fully open 78 1× 1086
2 Quarts 530×760
362×78 1
4 quarto 390×543
6 quarts 362×390
8 kai271× 390
16 195×27 1
Note: finished product size = paper size-trimming size
Large format paper: 850 * 1 168mm.
Number of openings (positive degree) Size unit (mm)
Fully open 844× 1 162
2 kai581× 844
3 open 387×844
4 quarto 422×58 1
6 quarts 387×422
8 quarts 290×422
Note: finished product size = paper size-trimming size
16 opening price: 2 10×285 positive number: 185×260.
8 Opening: 285×420 Positive: 260×370
4 Opening: 420×570 plus: 370×540
2 Openness: 570×840 Orthogonality: 540×740
Full open size: 889× 1 194 Small size: 787× 1092.
General manual
Standard size: (A4) 210mm x 285mm.
You compare it.
Printing paper specification
The so-called opening number means cutting into several parts. For example, an 8-size piece of paper is 1/8 (cut three times). Before designing, the paper size should be selected first, because the printing machine can only use several kinds of paper (generally fully open and fully open), and then cut it into the required size by the machine after printing once, so don't use special specifications other than the following table if it's all right, so as to avoid paper printing dissatisfaction and waste of space.
Because the machine grabs the paper and moves it, the edge of the paper cannot be printed, so the original size of the paper will be larger than the actual size, and the blank part of the edge will be cut off after printing, so there will be a difference between the full size and the cut size. If the poster is intentionally left blank, you can choose not to cut it.