Detailed steps of manufacturing process and installation method of Kabu light box:
1. Prepare aluminum profiles, bottom plates of accessories (four for large decoding and four for small decoding), light boxes, power supplies, lamp cloths and other tools (screwdrivers | screws | tapes | gloves).
2. According to the splicing angle of 45 degrees, first combine the four-sided profiles perfectly and align the corners diagonally.
3. Tighten the internal and external decoding screws with a screwdriver, and the screws play a fixed role, so that the whole light box frame is completed.
4. Put the backboard into the frame and fix it with screws, then lay the LED light bar on the backboard and fix it with glass glue. Install power supply at the edge of the outer frame where the outgoing line is located (red and blue wires are connected respectively).
5. Put on the canvas, just insert the silicone rubber strip installed around the UV soft film into the aluminum profile frame. Changing paintings is also a way to pull rubber strip out and change paintings. The design is fashionable and concise, and it is easier to remove and change.
6. The last step is to cut off the corners of the four sides so as not to accidentally hurt your hand. Ok, the whole light box is finished.
To sum up, it is the general process of manufacturing Minoshin Kabu light box.
Cabo lightbox installation video: What's the difference between Bula lightbox and Cabo lightbox?
1.Cabo light box is made of high quality aluminum alloy. If the picture is too big, Cabo light box can be displayed in many combinations.
Cabo light box is similar to wave light box, and can also be regarded as a special wave light box. Unlike the Rabo light box, the canvas of Cabo light box is stuck in the card slot of the light box frame with adhesive tape. Bula light box is usually hung on one side of the wall, but Kabu light box can be hung in the air, displayed with large double-sided drawings, supported independently, and displayed from all aspects to the greatest extent.
2. According to the light source, CCFL light box, EEFL light box and LED light box are more common. Labu light box is made of high quality aluminum alloy with rich styles. The cloth-pulling light box adopts a unique four-sided open cover and track sliding hook design, which is very convenient for changing pictures.
The difference between Kabu light box and Bula light box
The main difference between Kabu light box and Bula light box lies in the different picture materials, which leads to different advertising effects and prices. The following is the analysis of these two light boxes by Tianlang logo, a professional light box manufacturer:
I. Cabo light box
1, Kabu light box is to spray advertising pictures on UV soft film, and the light box consists of aluminum profile frame, high-brightness LED light bar and UV soft film cloth.
2. The light box frame used in Kabu light box is generally 3cm68cm10cm12cm.
3. The light box soft film used for Kabu light box has good overall effect and high precision, which can generally reach 1440 pixels.
4. The price of light box soft film used in Kabu light box is relatively high, generally 50- 120 yuan per square meter in the market, and the prices of different brands are different.
2. Pull the cloth light box
1, the cloth-pulling light box is to spray the advertising picture on the spray-painted cloth. The light box consists of aluminum frame, high-brightness LED strip and spray-painted cloth.
2. The light box frame for cloth drawing is 3.5cm 7cm9cm12cm17cm.
3. The overall effect of the light box picture used in the cloth-pulling light box is general, and the use time is short, which is suitable for large light boxes.
4. The price of paint cloth for light boxes is low, generally 5- 1 m2 in 60 yuan, and the price of different materials is different.
The difference between Kabu light box and Bula light box
There is not much difference between Kabu light box and Bula light box. Many people think they are the same light box. Minoshin advertising specializes in making light boxes. Here is a brief introduction to the difference between the two:
1.Cabo light box is made of high quality aluminum alloy. If the picture is too big, Cabo light box can be displayed in many combinations.
Cabo light box is similar to wave light box, and can also be regarded as a special wave light box. Unlike the Rabo light box, the canvas of Cabo light box is stuck in the card slot of the light box frame with adhesive tape. Bula light box is usually hung on one side of the wall, but Kabu light box can be hung in the air, displayed with large double-sided drawings, supported independently, and displayed from all aspects to the greatest extent.
2. According to the light source, CCFL light box, EEFL light box and LED light box are more common. Labu light box is made of high quality aluminum alloy with rich styles. The cloth-pulling light box adopts a unique four-sided open cover and track sliding hook design, which is very convenient for changing pictures.
How to change the cloth of Cabo light box?
There are two kinds of Cabo light boxes, one is stuck in the slot without opening the edge, which is more commonly used. If you want to replace it, just tear off the old cloth and stick the tape of the new cloth in the groove. Pay attention before and after. Generally, soft film is used, which is elastic. Winter may be shorter in the end, just pull hard. The soft membrane is elastic.
The second is that the side can be opened, and the cloth can be pulled with the miscellaneous belt and the aluminum hook inside. This is a little more troublesome, and 3m cloth is often used, because miscellaneous tapes need to be punched. This method is to hook the aluminum edge of the light box profile and mix it with the cloth sleeve at a distance of about 20 to 30 cm, which is easy to use.
Use of soft film Cabo light box
Flexible film light boxes are widely used, whether in shopping malls, airports, subway stations and other public places. It will be linked with our life and is also used by many enterprises and businesses for product display and advertising. This is a good quality and beautiful light box type. The material of light box will affect the performance of light box. Different brands may use different materials. However, the materials used in the soft film light box are much better than the general quality, and they are all very high-quality materials. But also makes the light box difficult to deform and damage, and has the characteristics of good waterproof performance. It is a good type of light box.
MINO soft film light box has beautiful appearance, which is particularly easy to attract people's attention. It is also a very energy-saving and environmentally-friendly product, which is not only conducive to national design standards, but also can enhance the overall image of enterprises. Compared with some ordinary light boxes, soft film light boxes are brighter, less prone to aging, rust and convenience. Moreover, some anti-aging and corrosion-resistant materials are adopted, which improves the service life of this soft film light box and belongs to a new type of environmental protection and energy-saving light box product that has successfully replaced the traditional light box as the mainstream light box.
How to calculate the power of Cabo light box
Generally, we estimate the power according to the square. The power of one side is about 60-70w, and the power supply ratio is 100w.
Why is the thickness of Cabo light box 80mm and 120mm?
There are various thicknesses of 4.6.8. 10. 12 cm, and the spacing of light bars is different. The light bars in the light box are divided into cross-flow type and constant voltage type, and the built-in power supply and external power supply are different in direct and diffuse reflection. There is also the material problem of the backboard (4MM aluminum plate and 4mm density board), and the effect is different. If necessary, you can contact me.