First, the development of electric clothes racks
First generation electric clothes hanger
The first generation of electric clothes rack consists of three parts: host system, lifting system and clothes drying system. The main engine group should be composed of ceiling bearing, power system, control system and lighting. The lifting system adopts steel wire rope and aluminum XX telescopic frame; The clothes drying system consists of a hanger bracket and a drying rod. The basic function of electric clothes hanger is to provide automatic clothes drying and quilt drying solutions for families, hotels and other users.
The greatest contribution of the first generation of electric clothes racks to modern life is the comfort of high-quality life. Once clothes are dried by electric clothes racks, people will get used to the laziness of modern life. For the elderly, children, pregnant women and vulnerable groups, this is a modern essential household appliance.
The spare parts cost of the first generation of electric clothes hangers is about 300 to 400 yuan, and the highest price is more than 3,000 yuan, creating the myth that the profit of household appliances industry is 1000%. Drug-grade profits attract a large number of shoddy manual workshops, and their only purpose is to muddle through.
Second generation electric clothes hanger
At present, the second generation of electric clothes hangers has appeared. Products with high quality, high performance and low cost are revolutionary inventions.
Nowadays, the electric clothes rack is more than just a tool for drying clothes. Besides buying clothes to dry, it is not only labor-saving and practical, but also an ornament. It has become a beautiful landscape on the balcony.
Second, the installation method of electric clothes rack
1? Top seat installation: it is necessary to add load to the installation base, which is generally treated with blockboard. At the top of the balcony to be installed, measure the diameter of the lighting lamp at the top of the balcony with a steel ruler, and then make installation marks on both sides of the lamp (the length depends on the size of the balcony). Then measure the distance from the mark to the balcony edge, and determine the width of the top seat installation according to this distance. Then measure the length of the balcony with the lamp as the center, and determine that both sides of the lamp are equally divided into 80 cm- 100 cm according to the length of the clothes drying rod, and then there are four intersections according to the measuring distance of the width, which are the installation positions of the top seat of the electric clothes drying rack.
After the position is determined, drill a hole with an electric drill. After drilling, fix the four top seats with expansion screws (if the rod length exceeds the normal size, adjust the distance accordingly).
Note: The two top seats near the crank angle are movable ends. The other two top seats are fixed seats. The difference between them is that. Movable seats are two-wheeled movable seats and must be installed in the front.
2 If a multipolar electric clothes rack is to be installed, the balcony width should be above 1 m, and the telescopic area within 1 m is small, so the drying effect is poor.
3? If the air height is more than 3 meters (usually double-decked), extra steel wire rope is needed (of course, there will be an extra charge), and customers need to bring their own high stairs.
4? Corner installation: Corner can be installed on the top of balcony or wall. The corner is 50-70 cm away from the movable top seat, and it must be triangular (45-degree angle) in the middle of the movable top seat, so as to keep the same vertical line with the hand installation position. Please refer to the drawing.
5? Wire connection: an electric clothes rack? There are two steel wires in it. Take out one first. First, pass one end of the steel wire through the bearing steel wire groove at the corner, then through the bearing steel wire groove at the top of the movable end top seat, and then through the bearing steel wire groove at the fixed end top seat, so that the steel wire is vertical to the ground, and then insert the top cover from the steel wire to clamp the top seat cover. The other end of the steel wire also passes through another hole in the bearing steel wire groove at the corner. Then pass through the steel wire groove of another movable wheel bearing of the movable seat (below the same top seat) to make the steel wire perpendicular to the ground, and then insert the top cover from the steel wire to clamp the top seat cover. The installation method of other steel wires is the same.
6? Dry connection? At the head end of each steel wire, thread a hanging ball and tie a knot on the hanging ball; Then pull the hanging ball to the top seat, and then pull the steel wire from the corner to form a double-stranded steel wire, which is clamped at one end of the handle; Loosen the steel wire on the crank and drop the ball. Pass the air rod through the hanging ball, and then tighten it at the hole of the hanging ball. Nail screws; Finally, plugs are installed at both ends of the electric clothes drying rod.
7? Customers who live on high floors can choose Sunba's electric clothes rack, which has strong balance ability and can effectively prevent the adverse effects brought by windy weather.
Third, the maintenance of electric clothes racks
1. In order to prolong the service life of the clothes rack/electric clothes rack, the clothes rail, handle and top seat must be cleaned regularly (especially for users without balcony) and maintained as often as possible, so that the clothes rack/electric clothes rack will be as clean as new.
2. Different brands of clothes dryers have different wire rope quality. The maintenance of wire rope is particularly important. Regular oiling can greatly reduce friction, ensure smooth lifting, greatly reduce the wear between the wire rope and pulley, and greatly prolong the service life of the clothes hanger, which is easy to do.
3. Do not use edible oil or solid butter as maintenance oil, but use lubricating oil and sewing machine oil.
4. Try to buy brand clothes racks/electric clothes racks that can promise after-sales service, and ensure high-quality products, professional installation services and perfect warranty and maintenance services, so as to have no worries!
5. The remote control of the electric clothes rack needs to be replaced in time.
The previous small series introduces the development process, installation method and maintenance method of electric clothes rack. Presumably, everyone is familiar with electric clothes hangers. For specific installation, please refer to the methods and steps given above. The above content is the installation method of the electric clothes rack that Bian Xiao introduced to you today. Want to know more, please continue to pay attention to Tuba rabbit decoration!
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~