How to install exhaust fan
Exhaust fan installation is not very complicated, generally can be divided into three kinds of exhaust fan, one is the ceiling duct ventilator, one is the partition wall ventilator, one is the glass window ventilator, due to the different installation location so the installation of different ways.
Ceiling duct ventilation fan installation is divided into two kinds, one is a panel of the machine, the other is the whole pipeline without a panel of the machine, there is a panel of the exhaust fan, generally before the installation is the panel of the exhaust fan is removed, the exhaust fan is a corner of the screws to fix the holes, you can use the self-tapping screws to the exhaust fan is fixed directly to the ceiling, and at the same time connected to the power supply and exhaust ducts, and finally the mask to hang on the ceiling, it can be, another is the whole pipeline, and the last one is a panel of the exhaust fan. On it, another is a full pipeline exhaust fan, general installation is not ceiling ceiling contact, directly using the silk rod from the top of the ceiling hanging down, the exhaust fan is fixed on the silk rod, and then connected to the power supply, air inlet and outlet are connected to the exhaust pipe, ventilation fan is installed.
Ceiling duct ventilator installation
Split duct ventilator installation
The second is a partition wall exhaust fan products, general installation of the bar mask down, the entire machine's main frame installed in the wall of the openings, surrounded by tapping screws, and the entire exhaust fan to the outdoors slightly tilted, so that you can avoid the rain back to the room, connect to power, and after the installation of the mask.
After the exhaust fan is installed, it is relatively simple to install a ventilating fan.
Partition wall exhaust fan installation diagram
The third is the window exhaust fan, general window exhaust fan is installed on the glass, so in the exhaust fan package has a special accessory, usually rubber gasket, need to be placed in the glass hole, and then use the exhaust fan above the clip, fix the exhaust fan, and finally install the mask, connect the power supply, the exhaust fan is installed.
Window exhaust fan installation schematic
Static electromechanical technology engineers to remind you, in addition to these common exhaust fan installation, there is an integrated ceiling exhaust fan installation, the installation of new air heat exchanger products, the installation of wind screen products, generally these will have a special installer to install, here will not be dedicated to the narrative again.