Tools/raw materials: monochrome four-wire, moderate length.

1, first make three rings as shown in the figure, arranged in a cross.

2. Turn the lower two lines up and press the ring on the right.

3. Press the right ring to the left, and then press the upper ring to the left, as shown in the figure:

4. Press the left ring to the lower right and pass through the gap below, as shown in the figure:

5. As shown in the figure, tighten the upper, lower, left and right ropes:

6. Compared with the previous steps, this step is more complicated. The specific method is to press the rings at the lower left and right clockwise and turn the top rope downward, as shown in the figure:

7. As shown in the figure, tighten the ropes on all sides:

8. Pull out the rope protruding between the two rings to complete the final compilation. You have finished, as shown: